6-13
Section 6 practice questions:
1. At a four way stop, who has the right of way?
2. What does a red line through a red circle mean?
3. What is the difference between a solid white line on the roadway and a broken
one?
4. When about to move into a shared left turn lane are you required to check the
blind spot area before moving into the lane?
5. When approaching an intersection that has a stop line and/or a crosswalk where
should you stop?
6. When making a turn onto a roadway with multiple lanes going in your direction
which lane should you initially turn into?
7-1
SECTION 7
General Driving
Turning
When turning:
• Check for traffic controls, pedestrians, and other vehicles. Signal your turn.
• Enter the closest lane in the direction you want to go.
• Look as far as you can through the turn.
• Accelerate smoothly and make sure your signal
cancels.
Right turns
• Do not swing wide to the left before a right turn.
• Always turn right from the rightmost portion of your
lane.
Left turns
• Yield to oncoming traffic.
• Always turn left from the leftmost portion of your
lane.
Multiple left or right turn lanes
• Enter the same lane from which you are turning.
• Stay in that lane until the turn is finished.
•
Intersections
An intersection is any place where roads meet, so that one line of traffic meets or crosses
another. It includes:
• Cross streets and side streets,
• Freeway entrances,
• Driveway and shopping center entrances.
Here are some of the rules to follow anytime you approach an intersection.
7-2
Make sure you look both ways, even when you cross a one-way street
(Someone might be going the wrong way).
At all intersections slow down and search for:
• traffic controls,
• oncoming traffic and cross traffic,
• pedestrians and bicyclists,
• road conditions, and
• objects that block your view.
Do not rely on others to obey traffic signals or signs. At an intersection, look left and right, even
if other traffic has a red light or stop sign because someone may run either one. They may not
yield the right of way when required so be prepared to do so to avoid a crash.
Before moving after a stop, check for traffic and bicyclists. Look left, then right, then left again
before you enter the intersection. When a light turns green, make sure your path of travel is clear
and there is no cross traffic.
Never think that another driver will give you any extra space. Do not turn into a lane just because
an oncoming vehicle has a turn signal on. The driver may plan to turn after they pass you or they
may have forgotten to turn their signal off.
Make sure you have a good view. If your view
of a cross street is blocked by buildings, trees, a
fence or a row of parked cars, edge forward
slowly until you can see. Don't start to turn yet! Wait until traffic
clears.
If a line of cars in one lane is blocking your view of another lane, wait until the cars pass. If you
try to look by edging the front of your car into the other lane, you may get hit.
Traffic Circles and Roundabouts
A traffic circle is a circular intersection. Traffic circles or roundabouts are sometimes built at
intersections of heavily traveled streets and roads. All vehicles approaching traffic circles or
roundabouts must yield the right- of-way to vehicles already in the circle or roundabout unless
otherwise directed by a police officer or by traffic control devices. Enter a roundabout by
proceeding to the right around the raised center island (counterclockwise). Raised pavement on
the inside of the circle enables trucks to negotiate around the small island, while vehicles stay in
the outer travel lane. At large traffic circles, called rotaries, vehicles also proceed to the right or
7-3
counterclockwise around the center island at a slow rate of speed until the street desired is
approached. Drivers must yield the right-of- way to a vehicle on the operator's left. Exit from the
circle or roundabout is then made by making a right turn. Extreme caution should be used when
entering and leaving traffic circles or roundabouts and strict attention to highway signs and
pavement markings is necessary.
If you are going to be turning from a rotary circle within two exits, it is suggested that you
should be in the right most lane (This applies unless otherwise indicated by road markings on
pavement or traffic signs specifying the lane to be used. When using traffic circles:
● Slow down to enter the circle. This sign warns you that there is a traffic circle ahead.
• Yield to the traffic in the circle.
• Enter a traffic circle to the right and follow the lane lines.
• Signal your exit.
Changing Lanes
When changing lanes:
• Check your mirrors.
• Check your “blind spot” by turning your head and looking over your shoulder in the
direction you plan to move. Blind spots are areas around your vehicle caused by
headrests and door pillars that block your vision. Blind spots are also areas that are not
covered by your mirrors.
• Whenever you change lanes, give the correct signal and look over your shoulder in the
direction you are about to move to make sure you do not get in the way of a vehicle that
is already there. Never rely solely on your rearview mirrors when making a lane
change.
• Find a gap in traffic, signal, and then look again before changing lanes. Adjust speed and
move into the other lane. Cancel your turn signal after completing a lane change.
7-4
Changing lanes includes:
• Changing lanes from one lane to another on a roadway,
• Entering a freeway or a highway from an entrance lane,
• Entering the roadway from the curb or shoulder of the road.
Here are some important things to do when you check for traffic behind you:
• Glance in the rearview and side mirrors. Make sure that nobody is preparing to pass you.
• Look over your left or right shoulder. Look towards the side you will be moving. Be sure
no one is near the left (or right) rear corner of your car. These areas are called "blind
spots" because your mirrors do not cover these areas. You must turn your head and look.
• Be alert for motorcycles or bicycles.
• Check quickly. Do not take your eyes off the road ahead for more than an instant. The
vehicle ahead of you could stop suddenly while you are checking behind.
• No matter what kind of car you have, or how well you adjust your mirrors, there are still
blind spots so never rely solely on your mirrors. It is the car you don't see that is the most
dangerous.
• Check all lanes. Someone in another lane may plan to move into the same spot you do.
• Always signal what you intend to do at least 100 feet before making a change.
Expressway driving
Entering a Multi-lane Highway
While expressway driving involves the same basic skills as driving on a secondary road, the
increase in speed makes caution even more crucial. The severity of an accident increases
dramatically at higher speeds!
• Communicate by using your left turn signal.
• Most expressways are reached by an entrance ramp and an acceleration lane. The
acceleration lane, which varies in length, enables you to get up to the speed of traffic
before merging into the regular lanes.
• Find a gap in traffic and merge left. Before merging, use your rear-view mirror and look
over your shoulder to ensure that the way is clear.
• Cancel your turn signal once entry is complete.
Some entrances to some expressways do not have acceleration lanes. In this case you
should stop before entering, wait for a break in the traffic and then speed up and merge.
7-5
Proceed carefully as cars which are already on the expressway are traveling very fast and
do not have to yield to you. Do not impede the flow of traffic by pulling into the lane
before you have built up enough speed.
Expressway passing
You should always be in the right-hand lane unless you are passing. Do not pass on the right or
pass on the shoulder of the roadway.
Sudden movements at high speeds are very dangerous. Use your mirrors and check over your
shoulder to make sure that the way is clear before passing. Mirrors alone are not sufficient due to
"blind spots". If a car is directly behind you in an adjacent lane, it will not be visible in the side
mirrors. Always notify other vehicles of your intent to pass by using the appropriate blinker.
Safe passing depends on cooperation between drivers. Don't speed up when being passed. Pass
as quickly and safely as possible. Do not stay alongside another vehicle any longer than you
must. Don't cut in too soon after passing someone. Make sure you can see the entire passed
vehicle in your rearview mirror before moving back to the right lane. Never cruise along in the
blind spot of the vehicle next to you.
Exiting a Multi-lane Highway
Get into the right-hand lane well before reaching the exit. Signal your intent to exit. Don't slow
down on the main expressway, rather, start slowing down as soon as you enter the deceleration
lane and continue slowing at the beginning of the exit ramp. Slow down to the posted speed on
the ramp or you may have difficulty getting around sharp curves. Make sure your signal cancels.
Stopping on an expressway
Never stop on an expressway unless it is an emergency. If an emergency should occur, use the
proper signal, and pull off the pavement as far as the shoulder permits. Raise your hood to signal
your need for assistance. Under no circumstance should you ever back up, walk or stand on the
traveled portion of the expressway.
7-6
Expressway Hypnosis
Traveling for long distances on straight roads may make you drowsy or unaware of what is
happening around you. This is an extremely dangerous situation; concentration is vitally
important whenever you are behind the wheel. Make every effort to stay alert on the highway:
1. Keep the interior of the car cool.
2. Constantly scan the road ahead of you.
3. Talk to your companion or listen to music.
4. Vary your speed slightly from time to time.
At the first sign of drowsiness you must act and don't try to fight it. Pull over at the nearest rest
stop or service area and either walk around and stretch, take a nap, or if possible, change drivers.
Don't depend on stay-awake drugs which are likely to make your driving even more hazardous.
Passing (non expressway):
Space to Pass
Whenever you pass another car on a two-lane road you must enter a lane that belongs to
oncoming cars. Therefore, it's important to watch for other vehicles. Signal, and then pass when
the way is clear.
At highway speeds of 50 to 55 mph, you need from 10 to 12 seconds to complete a pass safely.
You must judge whether or not you have enough room to pass whenever you approach (1) an
oncoming car, (2) a hill or a curve, (3) an intersection, or (4) a roadway obstruction.
To pass:
• Check for oncoming traffic.
• Check your mirrors and check over your shoulder for vehicles following or passing you.
• Signal.
• Steer into the passing (left) lane.
• Adjust speed.
• Wait until you can see the entire passed vehicle in your rearview mirror.
• Signal and check over your shoulder before returning to the right lane.
• Steer into the right lane, adjust your speed and cancel your turn signal.
7-7
When being passed:
• Stay in your lane.
• Hold a steady speed to allow the pass to occur.
If the passing vehicle changes their mind, and decides to drop back behind you, you may
need to speed up before an oncoming vehicle arrives.
Never pass:
• If there is an oncoming vehicle. At highway speeds you will
travel over 800 feet in 10 to 12 seconds. So will an
oncoming car. That means you need over 1600 feet or about
one-third of a mile to pass safely (use your odometer to get
to know what this distance looks like). It is hard to judge the
speed of oncoming cars or motorcycles one-third of a mile
away. They don't seem to be coming as fast as they really
are. A car far enough away seems to be standing still. In fact, it may be too close for you
start a pass.
• If your view is blocked by a curve or hill. Any time your view is blocked by a curve or a
hill, you should assume that there is an oncoming car just out of sight. Therefore, you
should treat a curve or a hill as you do an oncoming car. This means you should not start
to pass if you are within one-third of a mile of a hill or curve.
• At intersections. Do not pass where someone is likely to enter or cross the road. Passing
is dangerous at intersections, crossroads, and shopping center entrances. While you are
passing, your view of people and cars is blocked by the car you are passing.
• When approaching a railroad crossing or bridge
Lane Restrictions. Before you pass, look ahead for road conditions and traffic that may cause
other road users to move over into your lane. You might lose your space for passing due to:
• People or bikers near the road,
• A narrow bridge,
• A patch of ice, broken pavement, or something on the road.
Space to Return. Don't pull out to pass unless you know you have enough space to return. Don't
count on having enough time to pass several cars at once. And don't count on other drivers to
make room for your return.
7-8
Signs and Markings. Yellow road markings divide lanes of
traffic going in opposite directions. Many roads have lane
markings that tell when you cannot see far enough to pass.
Maine law requires that you complete a pass before you reach
the beginning of a no passing zone.
You may pass if there is a broken center line on your side of the
road. Pass only if there are no oncoming cars in the passing
lanes.
Lane markings and signs can tell you when it is unsafe to pass. Only you can tell when it is safe
to pass.
You may not pass where a yellow pennant NO PASSING
ZONE sign appears on the left of the road or a rectangular
white (regulatory) DO NOT PASS sign appears on the right
of the road.
When passing bicyclists, slow down and give them as much space as you can. Maine law
requires that there be at least three feet of space between the right side of your vehicle and the
bicycle as you pass.
Rules for School Buses
Where there are school buses, there are usually children. And children are likely to do the
unexpected.
It is illegal to pass a stopped school bus with red lights flashing on school property, on any
undivided highway or parking area in Maine. If you are approaching a stopped school bus
from either direction, with its red lights flashing, you must bring your vehicle to a complete stop
to the front or to the rear of the school bus and wait while children are getting on or off the bus.
You must not proceed until the bus resumes motion or until signaled by the school bus driver to
do so. Violations carry severe penalties.
You should not pass when there is
a solid center line on your side of
the road.
7-9
Multi-lane Divided Highway
You must stop for a school bus with red lights flashing and/or stop arm extended. After the red
lights have stopped flashing and the stop arm is no longer visible you may go ahead slowly while
watching for children. If the roadway has a solid divider between you and the bus, you do not
have to stop.
Parking
You must make sure that your vehicle is not a hazard when it is parked. When you park on a
public road, make sure you do not get in the way of traffic. You must park parallel to the road
except where angle parking lines are painted on the roadway. Leave at least two feet of space
between your car and vehicles parked in front or behind.
• Always park in a marked parking area.
• Move as far away from the driving lanes as possible. If there is a roadside shoulder, pull
as far onto it as you can. If there is a curb, park as close to it as you can (and no more
than 18 inches away)
7-10
• Make sure your car can't move. Set your parking brake and shift gears to park (first or
reverse in a manual shift car).
• If you are parked on a hill: Turn wheels so that if the car moves downhill the wheels will
be stopped by the curb. Or, if there is no curb, the wheels will turn the car off the road
(not into traffic). Turn the wheels to the right when parking downhill or uphill without a
curb. Turn the wheels to the left when parking uphill with a curb.
• Avoid traffic. Get out of your car on the curb side if you can. If you must use the street
side, check for traffic behind you, especially bicycles, before you open the door.
• Secure your car. Turn off the engine and remove the key when you leave a car. If the car
will be out of your sight you would be wise to lock it.
Some municipal ordinances do not allow you to park:
• In an area reserved for persons with disabilities unless you have a special parking permit
or plates for the disabled ($100 Fine). In addition, State law prohibits misuse of disability
plates and placards ($100 Fine).
• In a loading zone.
• Within 10 feet of a fire hydrant.
• Within 15 feet of a driveway entrance to a fire station or directly across from the
entrance.
• Within 15 feet of a crosswalk.
• At an entrance to a school, church, theater, hotel, hospital, or public place during hours
designated.
When is it acceptable to park in a disability parking spot with an access aisle?
A person parking in a disability parking spot, with an access aisle, will utilize the aisle to enter or
exit the vehicle. A disability plate or placard must be displayed.
• Used when the access aisle is needed to enter or exit the vehicle when using a platform
lift or other mobility device.
For additional information regarding the issuance of disability plates and disability parking
placards in the State of Maine, please contact the Bureau of Motor Vehicles at (207) 624-9000,
extension 52149.
Misuse of an access aisle is considered a
traffic infraction and subject to a fine of not
less than $200.00.
Access Aisle
Parking in an access aisle is prohibited.
7-11
No-Parking Zones - Check for signs or painted curbs that may ban or limit
parking. Some no parking zones are indicated by colored curb markings.
Perpendicular and Angle Parking
• When entering:
o Find a parking space and check traffic.
o Signal.
o Center your vehicle in the parking space.
o Move to the front of the space and stop.
• When exiting:
o Check for traffic.
o Continue to check traffic and back up until your front bumper clears the vehicle
beside you.
o Turn the steering wheel sharply in the direction you want the rear of your vehicle
to move.
o When your vehicle clears the parking space stop. Shift to drive and move ahead.
Angle Parking Perpendicular Parking
Parallel Parking/Offset Backing
When entering:
• Find a parking space. Check for
traffic and signal.
• Pull up parallel to the vehicle you
will be parking behind. Stop even
with that vehicle but about 2 feet
away from it.
7-12
• When traffic is clear, shift to reverse and look to the rear.
• Turn wheels sharply right, look over your right shoulder and back slowly toward the car
behind.
• Continue backing until your front door passes the back bumper of the car ahead, quickly
straighten the wheels and continue to back straight.
• When clear of the car ahead, turn wheels sharply left and back slowly to car behind.
• Stop before touching the bumper of the vehicle behind you.
• Turn wheels sharply right and pull forward toward the center of the parking space.
• Straighten wheels unless you are on a hill. You should be about 6 inches from the curb
but not more than 18 inches away from the curb when done parking.
• Adjustments to this method, depending on the size of your vehicle, may be required but
practice is always the key.
When exiting an offset or parallel parking space:
• Check traffic and apply the brake. Shift to reverse and back up close to the vehicle parked
behind you.
• Check for traffic and signal. Shift to drive and move forward slowly. Steer out into the
roadway.
• Make sure that the front bumper of your vehicle will clear the vehicle ahead. If not, shift
to reverse and readjust.
• Move quickly into the traffic lane when the doorpost of your vehicle clears the rear
bumper of the vehicle ahead of you.
Starting from a Parking Place
If parked on the right-hand side of the road, after starting your vehicle, look over your left
shoulder (not through your rearview mirror only). When the way is clear give the appropriate
signal and pull slowly out into the street and into the correct lane as soon as possible. Do the
same from left curb, except look over your right shoulder as you enter the roadway.
Regardless of the type of street or position, always make sure that the lane which you are about
to enter is free of traffic for a safe distance.
7-13
Turning Around
Two-point Turnaround – A street, alley or driveway can be used to turn around
when you cannot drive around the block.
• Reverse Two-Point Turnaround – Check that there are no vehicles behind you.
Signal a right turn. Drive one car length past the driveway or alley, put your
right arm on the passenger seat, look back over your right shoulder and back
into the driveway. Shift to drive and check for traffic. When it is clear, signal
left, and then turn left into the proper lane and drive away.
• Forward Two-Point Turnaround – Check that there is no oncoming traffic and
signal a left turn. Move close to the center of the road and turn into the
driveway or alley. Turn as near as possible to the right side of the drive. Stop as
the rear of the vehicle clears the curb or edge of the driveway. Check for traffic,
signal a right turn and shift to reverse. When the path is clear, back up while
turning the steering wheel quickly all the way to the right. Straighten your
wheels and stop when you are centered in the lane. Shift to drive, cancel your
signal, and drive away.
Three-Point Turnaround – Use this only if the road is too narrow for a U-turn.
It’s best to go around the block if you can. This should only be used on a two-lane
road.
• Check the mirrors and signal a right turn. Stop on the right side of the road.
• Turn on your left turn signal, check traffic and check over your left shoulder. When traffic is
clear, turn hard left, drive to the other side of the road, and stop.
• Shift to reverse. Check traffic and check your blind spots to both sides. When traffic is clear,
turn hard right and back up to the other side of the road and stop.
• Shift to drive and turn on the left turn signal. Check traffic and blind spots. When traffic is
clear, turn hard left and drive forward into the right lane heading in the new direction. Check
again for traffic and cancel your turn signal.
8-1
SECTION 8
Managing Time and Space
Driving requires skills you can only gain through practice. This section covers critical skills for
safe driving.
Seeing what’s Critical
As you drive you must always be constantly aware of your surroundings. You must be aware of
what is ahead, to the sides and behind you. Have a search pattern for use every time you are
driving.
Continual searching helps you to see hazards early. It gives you time to change speed or
direction to avoid hazards. Stay alert, don’t stare, and keep your eyes moving as you search for
possible problems. Most of what you do while driving is a reaction to what you see.
Having Clear Windows and Mirrors
Prior sections have told you where to look. This section will tell you how to have a clear view
wherever you are looking.
By law, and for safety's sake, you must be able to see clearly through all windows, the
windshield, and all mirrors. To see clearly you should:
• Keep the windshield clean. Bright sun or headlights on a dirty windshield make it hard to
see. Carry a rag so that you can stop and clean your windshield when needed.
• Keep the washer fluid full. However, do not use washer fluid on a very cold day as the
mixture may freeze on the windshield.
• Smoking while driving causes a film to build up on the glass inside the car. Clean the
inside of the windows frequently if you smoke.
• Clear snow, ice, or frost from all windows and head and taillights before you start to
drive.
• Don't hang things from the mirror or clutter the windshield with decals. Anything in the
car that blocks a driver's vision is a violation of the law.
Wearing Glasses
If you wear glasses or contact lenses:
• If restricted, you must always wear them when you drive.
• Keep an extra pair of glasses in the car in case your regular glasses are broken or lost.
8-2
To be a good driver, you need to see well. Seeing well means:
Look ahead – Looking far ahead gives you time to plan your path.
The sooner you see a problem, the more reaction time you have.
How far you look down the road depends on where you are
driving. In cities and urban areas, you may not be able to see as far
ahead as on a highway. Don’t follow closely behind larger
vehicles as they will block your vision. Give yourself space so you
can see.
Suppose you are the driver looking through the windshield. You are approaching the end of the lane. If you don't change lanes
soon, you may have to make a sudden lane change, or stop and wait for traffic to clear.
To avoid last minute moves, you need to look far
enough ahead to see things early. One of the most
common mistakes drivers make is looking in front of
the car instead of up the road. An expert driver tries
to keep looking 20 to 30 seconds ahead.
Looking 20 to 30 seconds ahead also helps you to
control the car in another way. When you focus
attention ahead, it is easier to keep your car on a
steady path.
Taking in the Whole Scene/Look to the sides
Looking 20 to 30 seconds ahead doesn't mean looking at the middle of the road. It means taking
in the entire scene which includes the sides of the road as well. Scanning the roadside helps you
to see:
• Vehicles and people that may be in the road by the time you reach them.
• Signs warning of conditions ahead.
• Signs giving you information about places ahead and how to reach them.
• Animals. Many cars strike deer, especially in October and November. If you see a deer,
sound the horn, and look for other deer following.
If you look ahead, you will be able to see important things that you may not see later, such as
someone getting into a parked car. The car door might open again, or the car might suddenly
move into your lane.
8-3
Roadside Areas
Whenever there is a lot of activity along the side of the road, there is a good chance that someone
will cross or enter. Therefore, it is very important to look to the sides when you are near:
• Shopping centers and parking lots,
• Construction areas,
• Busy sidewalks,
• Playgrounds, schoolyards, and parks,
• Lawn and garage sales.
A 5-sided sign means you are in a school zone and
must slow to 15 mph during recess, or when children
are going to or leaving school, during school opening
or closing hours (½ hour before the start of the school
day to ½ hour after the end of the school day), or when
school speed limit signs are flashing during school
opening or closing hours.
School Crossing
Railroad Crossings
Look both ways as you approach a railroad crossing.
• Be alert for buses, school buses, tank trucks, etc. that must stop at all railroad crossings.
• If you must stop in heavy traffic, stop before the tracks - not on them.
• Slow down and look both ways, even if the warning sign is not flashing as it may not be
working.
• If red lights are flashing, stop at least 15 feet from the crossing and wait until they go out
or until you see that the way is clear in both directions. Do not drive around any railroad
crossing gate or barrier.
• If you are stopped at a railroad crossing where there is more than one set of tracks, don't
start as soon as a train goes by. Wait until you have a clear view down the track in both
directions before you start across. Another train could be coming from the other
direction.
• Don't shift a manual transmission while crossing the railroad tracks. Being in gear gives
you better control on the uneven surface.
Tracks marked "Exempt" are not used often but may be in use. Check all tracks
regardless of these signs.
Look behind – You must be aware of traffic behind you. Check behind you when changing
lanes, slowing down, or stopping. Check before you enter an intersection. Check your mirror
often for traffic behind you - every 6 to 8 seconds. This way you will know if someone is
following too closely or coming up too fast which gives you time to alter your speed or path if
necessary. Additionally, you will know the cushion of space you have to the rear at all times.
8-4
You need to look behind you whenever you slow down quickly, back up, or drive down a long or
steep hill.
When You Slow Down Suddenly
Look in the mirrors quickly before you slow down or stop. It is very important to do this
when you slow down suddenly.
Here are some situations when you need to check behind before slowing:
• When you slow down for something in the road ahead that the driver behind you cannot
see (for example, you come around a corner and see a car stalled in the middle of the
road).
• When you are preparing to turn into a side road or driveway. (When the turn is just before
a large intersection, a driver behind will not expect you to slow down where you do and
may be too close behind)
• When you are stopping to pull into a parking space.
• When you are slowing or stopping for pedestrians.
Allowing a Space Cushion for Problem Drivers
There are certain people you should give a lot of room to while driving. If you are alert you will
learn to spot them as you drive.
Drivers who cannot see you.
Someone who cannot see you may enter your path
without knowing you are there. People who have
trouble seeing you might include:
• Drivers at intersections, or driveways, whose view is blocked by buildings, trees, or other
cars.
• Drivers backing out of driveways or parking spaces.
• Drivers whose windows are covered with snow or ice.
People who are distracted. Even when others can see
you, allow extra room if you think they may be
distracted. People who may be distracted include:
Delivery men and women.
Construction workers.
Children who often run into the street without looking.
8-5
People who may be confused. A person who is confused is very likely to make a move without
looking. People who may be confused include:
• Tourists, often at complicated intersections.
This tourist may be confused by the sign and may change lanes suddenly. Be prepared to react.
Drivers who slow down for what seems to be unknown reasons.
The driver has pulled into the exit lane and then braked suddenly. Be careful because the car may swing back into
your lane.
Drivers in trouble. If other drivers make a mistake, do what you can to help them out. Drivers
who need help include:
• Drivers who pass as you approach a curve or an oncoming car. Slow down and let them
back in your lane.
• Drivers who may be forced into your lane by a car, pedestrian, bicyclist, obstruction in
the road, or narrowing of the roadway. Slow down and move to the right as much as you
can.
Managing Speed
Driving safely requires adjusting your speed for road and traffic conditions, keeping a safe
following distance, and obeying the speed limit. What is a safe speed? How fast is too fast? It all
depends on conditions.
When You Are Going Up a Long or Steep Hill
Check your mirrors. Drivers of trucks and buses often try to build up speed so that they can make
it to the top of the next hill. If you see them early, you can change lanes.
8-6
Adjusting for Road Conditions
Curves – Always slow before entering a curve. A safe speed allows you
to slightly accelerate through the curve. Slow more if traction is poor,
when following other vehicles or if you cannot see the end of the curve.
Hard braking in a curve can cause a skid because about two tons of
vehicle is moving in a straight line with only the front tires to control the
turn. If the curve is too sharp, or if you are going too fast, the tires can
lose their grip and cause a skid. Bad curves are usually posted with
yellow diamond shaped signs.
Sharp curve to the left.
Curve to the right
Slippery roads – Reduce speed at the first sign of rain, snow, sleet, or ice. When the roadway is
slippery, it will take longer to stop, and it will be harder to turn without skidding. If the road
ahead is slippery, it does not provide the grip your tires need to maintain control so on a slippery
road you must drive slower than you would on a dry road.
Here are some guidelines for how much to slow the car:
• Wet road: Slow down 5 to 10 mph.
• Packed snow: Slow down to half speed.
• Ice: Slow to a crawl.
Falling or drifting snow, wet leaves, or gravel on the road may make it slippery. Some road
surfaces are more slippery than others when wet.
These roads are usually posted with warning
signs:
You know it is important to slow down when the road is slippery. But you must watch out for
when slippery conditions develop such as:
• When it starts to rain, pavement can be very slippery for the first few minutes. Heat
causes oil in the asphalt to come to the surface. Also, oil may have dropped on the road
surface from other vehicles. Rain makes the road slippery until the oil is washed away.
8-7
• On cold, wet days, bridges and overpasses can hide spots of ice. Be aware that bridges
and overpasses tend to freeze first and dry out last.
• When the temperature is near freezing, road ice is wet (slushy) so is more slippery
than at colder temperatures.
Hydroplaning – At low speeds, most tires will wipe water from
a road surface. It is like the way a windshield wiper cleans water
off the window. As you go faster, your tires cannot wipe the road
as well. They start to ride up on a film of water, like water skis.
This is called "hydroplaning." In heavy rain, the tires can lose all contact with the road at high
speeds. Balding tires lose contact at much lower speeds. In that case, a slight change of direction
or a gust of wind could throw your car into a skid. The best way to keep from hydroplaning is to
be sure that your tires are in good condition and that you keep your speed down when the road is
wet.
Flooded Roadways – Do not drive through large bodies of standing water. If the
roadway is flooded, find another route.
Stopping Distance
Total stopping distance is the distance from the time you realize you must stop until your vehicle
is completely stopped. Several things affect stopping distance:
• Speed – the faster you are traveling, the more time and distance it takes to stop.
• Perception time – the time it takes you to recognize you must stop. The average
perception time for an alert driver is ¾ to 1 second.
• Your reaction time – the time it takes for you to react and move your foot from the gas to
the brake pedal and begin braking. The average driver has a reaction time of ¾ to 1
second.
• Braking distance – the distance it takes to stop your vehicle. At 50 mph on dry pavement
with good brakes, it can take about 158 feet. Adding perception time and reaction time
nearly doubles this distance.
Speed Limits
Speed limits are posted on many roads. These limits are based on the condition of the
road, how far you can see, and what typical traffic is like. Posted speed limits do not tell you at
what speed you must drive. They only say you cannot go faster than the speed shown. If road and
weather conditions make the posted speed unsafe, you must slow down.
Maximum speeds in Maine, unless posted otherwise, are:
• 45 Miles per hour outside any business or residential or built-up area of Maine.
• 25 Miles per hour in a business district, residential district, or built-up area of the state.
• 15 Miles per hour when passing a school during recess, or when children are going to or
from school during the school's opening or closing hours. It is difficult to know just when
8-8
these periods are so when in doubt, use extreme care. A fine twice that of the usual fine is
imposed for exceeding the posted speed limit in a school zone.
Traffic experts have studied road conditions, traffic, and accidents on the road to decide on a
reasonable speed limit. It is illegal to exceed the posted speed limit. Racing on the highway and
driving recklessly are not allowed. Maine law also says you must not drive so slowly that you
interfere with the normal and reasonable movement of traffic except where reduced speed is
necessary for safety. Some highways may have minimum posted speed limits.
What is the Road Surface Like?
The only contact your car has with the road is through the tires. And, at any time, the four tires
together have only one square foot of rubber on the surface of the road. How good a grip this one
square foot provides depends on the condition of the road and the tires. Many new drivers do not
pay attention to road conditions. That is why new drivers have more "out of control" accidents
than experienced drivers. (Also check the tread of the tires. Replace tires before they get too
worn for safety.)
How Well Can You See?
If something is in your path, you need to see it in time to be able to stop. Assuming you have
good tires, good brakes, and dry pavement conditions the following chart should help to
determine how far ahead you should see to drive safely when traveling at certain speeds.
STOPPING DISTANCE AT DIFFERENT SPEEDS
On Dry Level Pavement
M.P.H. Reaction Time
Distance (feet)
Braking distance
(feet)
Total Stopping
Distance (feet)
Total Stopping Distance in
Approximate Vehicle Lengths
(Vehicle Length = 16 ft.)
10 11 9 20 1
20 22 23 45 3
30 33 45 78 5
40 44 81 125 8
50 55 133 188 13
60 66 206 272 18
70 77 304 381 25
Some Things Keep You from Seeing:
• Darkness. You must be closer to an object to see it at night than during the day. Never
drive so fast that you cannot stop within the distance you can see ahead with your lights.
Headlights will let you see clearly only about 250 feet ahead. Therefore, if you drive
faster than about 50 mph on a dark road, you are really "driving blind."
• Rain, Fog, or Snow. In a very heavy rain, a snowstorm or thick fog, you may not be able
to properly see, even when you drive slowly. If this happens, pull off the road and wait
until the conditions improve.
8-9
• Intersections. Trees, bushes, or buildings at intersections can block your view of cars
coming from the side. You need to approach a "blind" intersection slowly enough to be
able to stop if a car pulls out suddenly.
• Hills and Curves. You never know what's on the other side of a steep hill or a sharp
curve. If a stalled car is there you must be going slowly enough to stop. When you come
to a steep hill or curve, slow down so that you can stop if needed.
• Parked Cars. Cars parked along the side of the road block your view. People may be
ready to get out of a car or walk out from between parked cars. Give parked cars plenty
of room and be prepared to stop.
How Much Traffic is there?
When there are lots of cars there is less driving space; therefore, you have less time and space to
react. In heavy traffic you need to reduce your speed to have time to react within the shorter
space and timeframe.
Some of the places where you need to reduce speed are:
• Shopping centers, parking lots, and downtown areas. They are packed with cars and
people moving in different directions at the same time.
• In heavy traffic.
• Narrow bridges and tunnels. Cars approaching each other are forced closer together.
• Toll plazas. Cars are changing lanes as they approach and leave the plazas.
• Schools, playgrounds, and residential streets.
How Fast Is Traffic Moving?
Cars moving in the same lane at the same speed cannot hit one another. Accidents tend to happen
when one driver is going faster or slower than other cars on the road.
Driving in traffic: If you are going faster than traffic (even if you are keeping within the posted
speed limit), you must keep passing other cars. Each time you pass another car there is more of a
chance for a collision. The car you are passing may change lanes suddenly. On a two-lane road
an oncoming car may appear suddenly. True, it may not be a big chance, but if you are passing
one car after another, the chances begin to add up. Also, speeding does not save more than a few
minutes out of an hour's drive time.
Going slower than other cars or stopping suddenly can be just as bad as speeding. Cars bunch up
behind you and could cause a rear-end crash. If many cars are pulling out to pass you, even
though you are driving at the posted speed, you could slow up a bit or pull over to the right side
so you can be passed safely.
Entering traffic: You need skill and caution to enter a freeway safely from an access lane, and
merge smoothly with the fast-moving traffic. Look for a gap, then increase speed in the entrance
lane and enter the gap at highway speed.
Leaving traffic: On an expressway, do not slow down until you move into the exit lane. When
you turn off a road at an intersection or driveway, try not to slow too early or go too slowly
8-10
(below 5 to 10 mph). Slowing way down or stopping will increase your chances of being hit
from behind.
Reacting to slow-moving traffic: Some vehicles have trouble keeping up with the speed of
traffic. When you see these vehicles ahead, adjust your speed before you reach them. Slowing
suddenly is one cause of traffic accidents. Watch for large trucks and small cars as these vehicles
may lose speed on long or steep hills and, when entering traffic, they take longer to get up to
speed.
Farm tractors, animal-drawn carts and roadway maintenance vehicles usually go 25 mph
or less. These vehicles have a red edged orange triangle (slow-moving vehicle sign)
posted on the back of their vehicle.
Warning Signs
There are many signs that warn you of danger ahead. If you see these signs, you should reduce
your speed. Then you will have time to react if there is trouble.
Warning signs are almost always yellow and shaped like a diamond. Here are some of the most
common ones:
1. There is a traffic signal ahead.
2. There is another lane of traffic on the right merging with your lane ahead.
3. There is two-way traffic.
4. The divided highway ends ahead.
5. The divided highway begins ahead.
6. There is a place ahead where deer often cross the road.
7. The right lane ends ahead (merge left).
8. Bicycles or bicycle crossing ahead, pay extra attention.
9. There is an intersection ahead.
10. There is a stop sign ahead.
8-11
Managing Space
The more space you allow between your vehicle and other roadway users, the more time you give
yourself to react. This is called a space cushion. Always try to maintain a safe space cushion around
your vehicle.
Maintaining a Safe Cushion
When a driver makes a mistake, other drivers need time to react. The only way you can be sure
you will have enough time to react is by leaving plenty of space between your car and the cars
around you. That space becomes a "space cushion" which protects you from others. In general,
you should try to keep a cushion of space on all sides of your motor vehicle which should
properly consider the existing speed and road conditions.
Space in Front
Following too closely limits your view of the road. It does not allow enough reaction time to
avoid a collision. Keep at least 4 seconds between your car and the vehicle in front.
To determine your following distance:
• Watch when the rear of the vehicle ahead passes a sign, pole, or any other fixed point.
• Count the seconds it takes you to reach the same point (“One-thousand-one, one-
thousand-two, one-thousand-three, one-thousand-four”).
• You are following too close if you pass that point before counting 4 seconds.
• Slow down and check your new following distance. Repeat until you are following no
closer than four seconds.
In some situations, you should allow an extra cushion. A four plus second following distance
may be needed during adverse conditions.
Always increase your following distance:
• On slick roads. On slippery roads. If the car ahead should slow or stop, you will need
more distance to stop your car.
• When following motorcycles or bicycles. If the cyclist should fall, you will need extra
distance to avoid striking the rider. The chances of a fall are greatest on wet or icy roads,
metal surfaces (such as bridge gratings or railroad tracks), or on gravel.
8-12
• When the driver behind you wants to pass, slow a bit while they pass to assist the passing
driver.
• When following large vehicles or vehicles pulling a trailer whose view to the rear may be
blocked. The drivers of trucks, buses, vans, or cars pulling campers or trailers can't see
you very well if you are too close. They could slow down suddenly without knowing you
are behind them.
• When following trucks, tractor-trailers and buses, there are several things you should
keep in mind:
o Don't follow so closely that their drivers can't see you in their rearview mirrors or
your view of the road ahead is blocked.
o Trucks and buses often make wide turns, leaving an open space to their right in
the process. Don't pass such vehicles on the right if there is a chance that they are
making a right-hand turn.
o Large vehicles gain a substantial amount of momentum when going downhill and
often lose speed when climbing a hill. Take these factors into consideration when
deciding whether to pass a large vehicle.
o Leave space in front of you when stopped behind a truck or bus at an intersection,
especially on a hill, in case the vehicle rolls back a bit before starting forward.
• At night, in fog, or in bad weather.
• When following vehicles that stop at railroad crossings, like transit buses, school buses or
vehicles carrying dangerous materials. School buses and tank trucks carrying flammable
liquids must stop at all railroad crossings so expect the stops and slow down early to
allow plenty of room for stopping.
• When you have a heavy load or are pulling a trailer, the extra weight increases your
braking distance.
• When speeds are high.
• You should also allow a space cushion when you are stopped on a hill. The vehicle ahead
may roll back when it starts up.
8-13
Space to the Side
You need a space cushion to the side to have room to react to sudden moves toward your lane by
other cars. A space cushion on the sides of your vehicle allows you to move right or left.
• Don’t drive alongside other vehicles on multi-lane streets as you may be in their blind
spot. Driving alongside reduces the space you may need to avoid a collision if someone
crowds your lane or tries to suddenly change lanes. Either pull ahead of the other vehicle
or drop back.
• Don’t crowd the center line. Keep as much space as you can between you and oncoming
traffic. Keep right except to pass. When you are in the lane next to the center line, there is
no space for escape. And an oncoming vehicle could swerve across the center line or turn
left without signaling.
• Make space for vehicles entering multi-lane roads by moving over a lane or slowing
down.
• At freeway exits, don't drive alongside other cars. A driver on the freeway to your left
may exit suddenly or a driver exiting may suddenly swerve back onto the freeway.
• Keep a space between yourself and parked cars. Someone may step out of a car, from
between parked cars or a car may start to pull out of their parking space suddenly.
• Give more space to pedestrians, children, and bicyclists.
• When you are passed by a tractor-trailer, move to the right side of your lane. Give
yourself space from the tractor-trailer as it passes.
8-14
Space Behind Affects Your Following Distance
Give yourself extra following distance before reducing speed or turning. The driver behind you
has more control over the space behind you than you do. However, you can help by maintaining
a steady speed and signaling in advance when you plan to slow down or turn.
If you are being followed too closely and there is a lane to your right, move over to encourage
the other driver to pass. If there is no right lane, wait until the way ahead is clear, then reduce
speed slowly to encourage the tailgater to pass.
Splitting the Difference
Sometimes there will be dangers on both sides of the
road. There may be parked cars to the right and
oncoming cars to the left. In this case, steer a middle
course between the oncoming cars and the parked cars.
Split the difference.
Taking Dangers One at a Time
Sometimes you have two dangers to deal with at the same time. Suppose there is an oncoming
car to the left and a bicyclist to the right. Instead of driving between the car and the bike, take
them one at a time. Slow down, let the car pass, and then move to the left to allow plenty of room
(three feet) as you pass the bicyclist.
Don't pass yet. Wait until the approaching car passes the
bicycle. Then pull out and pass the bicycle.
Sharing Space with Other Road Users
When you are in moving traffic, you can control the speed and position of the motor vehicle to
keep a space cushion around you. When you approach a line of traffic, however, you must share
space with vehicles already there. One of the biggest problems drivers have is judging how much
space they are going to need.
Learn to judge how much space you must have to merge with traffic, to cross or enter traffic and
to pass other motor vehicles. Remember, when you make any of these movements you must
yield the right of way to the other cars. It is your responsibility to allow enough space to keep
from interfering with existing traffic.
8-15
Space to Merge
Anytime you merge with other traffic, you need a gap of four seconds to merge safely. That will
give both you and the car behind you a safe following distance. You need a four-second gap
whenever you change lanes or enter a freeway from an entrance lane or merge with another road.
• Don't try to squeeze into a gap that is too small. Leave yourself a big enough space
cushion.
• If you must cross several lanes, change lanes one at a time. If you stop to wait until all
lanes are clear, you will tie up traffic and may cause a collision.
Space to Cross or Enter
Whenever you cross or enter traffic from a complete stop, you will need large gaps. To get
moving from a full stop, you need a gap that is:
• About a half a block on city streets,
• About a full block on the highway.
To enter a lane of existing traffic, you need a little more time to complete your turn and to get up
to the speed of the other cars. You need a gap that is:
• About two-thirds of a block in the city,
• About two blocks on the highway.
When you cross traffic, you need enough room to get all the way across.
• Stopping halfway across is only safe when there is a median divider large enough to hold
your car.
• If you are crossing or turning, make sure there are no cars or people blocking the path
ahead or the path to the side. You don't want to be caught in an intersection with traffic
bearing down on you.
• Even if you have the green light, don't start across if there are cars blocking your way. If
you are caught in the intersection when the light changes, you will block traffic.
• Never assume another driver will share space with you. Don't turn just because an
approaching car has a turn signal on. The driver may plan to turn just beyond you. Or
their signal may have been left on from an earlier turn. This is likely to happen with
motorcycles because their signals aren’t always self-cancelling. Wait until the other
driver starts to turn before making your move.
Communicating
Accidents often happen because one driver doesn't see another driver. Or when one driver does
something the other driver doesn't expect. Drivers must let others know where they are and what
they plan to do by communicating. Communicating in a vehicle is done in various ways that
include:
Attract attention
Use headlights – Turning on your headlights helps other roadway users see you. Besides helping
you to see at night, headlights help other people see you in the daytime as well. Especially:
8-16
• In rain, snow, or fog. On rainy, snowy, or foggy days, it's sometimes very hard for other
people to see your car. On gray days, cars seem to blend into the surroundings. By Maine
law whenever visibility is too dim for you to see 1000 feet ahead or at any time when
windshield wipers are in constant use you must turn on the headlights
• When it begins to get dark. If you turn on the headlights a little early-when it begins to
get dark-you will help other drivers to see you. By Maine law you must have headlights
on when driving anytime from sunset to sunrise.
• When driving away from a rising or setting sun.
• Whenever you are moving and lights are necessary, use your headlights.
• It is not a good driving practice to operate a motor vehicle with only the parking lights
on.
• Turn on the headlights whenever you have trouble seeing other cars. If you can't see
them, they can't see you.
• Motorcyclists are always required to have their headlights on when operating a
motorcycle on Maine roadways.
Seeing Well at Night
It is harder to see things at night, due to darkness, than during the daytime. But you can do some
things to improve your nighttime visibility:
• Use the high beams whenever possible. High beams let you see twice as far as low
beams. Be sure to use high beams on unfamiliar roads, in construction areas, or where
there may be people along the side of the road.
• When a vehicle equipped with multiple beam road lights approaches an oncoming vehicle
within 500 feet or follows a vehicle within 300 feet, the operator shall dim the headlights
or switch to a low beam and shall turn off a fog auxiliary light.
• Use low beams in fog, snow, or heavy rain as light from your own high beams will reflect
back on you from such precipitation and cause a glare that will affect your vision.
If a vehicle comes toward you with high
beams on, and fails to dim the lights, slow
down and look toward the right side of the
road. This will keep you from being blinded
by the other car’s headlights. You should also
be able to see enough of the edge of the lane
to stay on the roadway until the car passes.
Do not try to "get back" at the other driver by
keeping your bright lights on. If you do, both
drivers will be blinded.
8-17
Use your horn – People cannot see you unless they are looking in your direction. The horn
can be used to get their attention. Use it whenever it will help prevent an accident. Horns
can be misused. You should not use the horn without cause or just to make an
unreasonably loud noise. Tap the horn lightly; well in advance, to inform others that you
are there. Try to avoid using the horn when near bicyclists or horses because the riders or
horse may become startled, lose control, and veer out into the roadway. But if danger is
near, don't be afraid to sound a sharp blast. Give your horn a light tap when:
• Pedestrians or bicyclists appear to be moving into your lane of travel
• Passing a driver who starts to turn into your lane
• A driver is not paying attention or may have trouble seeing you
Not using your horn – Use your horn only when you need to signal other road users not just to
scare others.
Signal
Always signal before you turn or slow down.
Signal in advance – Give others time to react.
Signal when changing lanes, turning or when
merging into traffic. Be sure to cancel your
signal afterwards. When making a turn that is
beyond a side street, do not put your turn
signal on until after passing the side street.
Signal when reducing speed - Brake lights let others know that you are slowing down. Tap your
brake pedal when:
• Turning off a road that does not have a separate turn or exit lane.
• Parking or turning before an intersection.
Signaling Change of Direction
Other drivers expect you to keep driving in the same direction. If you are going to change
direction let others know by signaling with the blinkers or by hand. Timely signals give other
drivers time to react.
Always signal before you:
• Change lanes,
• Turn at an intersection
• Enter or leave a freeway
• Enter or exit a parking lot
• Turn into a driveway
8-18
It is a good idea to also signal before you:
• Pull away from the curb or pull over to the side of the road to stop
If you do not signal, other drivers will not know what you plan to do. To make sure others do
know:
• Make it a habit to signal every time you change direction. Signal even when you don't see
anyone around. The car you don't see is the most dangerous.
• Signal as early as you can-at least 100 feet before any change or turn.
• Use hand signals if the turn signals are not working.
• If you plan to turn beyond an intersection, signal after that intersection. If you signal
before the intersection, another driver might get the wrong idea at that intersection and
pull into your path.
• After you have made a turn or lane change, make sure the signal cancels.
Hand Signals
Left turn Right turn Slowing or stopping
Using Emergency Signals
If your car breaks down on the highway, make sure that other drivers can see it. Some accidents
occur because a driver didn't see a stalled car until it was too late to avoid hitting it.
If you are having car trouble and must stop along the side of the road:
• If possible, pull all the way off the road so you are well out of traffic.
• Turn on your emergency flashers.
• If your car doesn't have flashers, use the proper turn signal.
• Lift the hood to signal an emergency.
• If you cannot get completely off the roadway, try to stop where people have a clear view
of you.
• Try not to stop just over a hill or around a curve.
• Give other drivers plenty of warning. If you have emergency flares place them at least
100 feet behind the car (Large vehicles must place 3 emergency devices in specified
places). This allows other drivers to change lanes if they need to.
• If you don't have emergency flares, stand by the side of the road, and wave traffic around.
Use a cloth or a flag if you have it. Stay off the roadway. Don't even change a tire if it
means you must stand in a traffic lane.
8-19
Keeping Your Car Where It Can Be Seen
• Drive where your car can be seen. Do not drive in another driver's blind spot.
• Try to avoid driving on either side and slightly to the rear of another vehicle for a long
period of time. Either speed up or drop back to clear that lane and so you can be seen.
• When passing another vehicle, get through the other driver's blind spot as quickly as you
can.
Section 8 practice questions:
1. Good drivers try to see ahead for at least how many seconds?
2. You are at a stop sign. A car approaches from the left which has its directional signal
flashing indicating a right turn into the road you are about to leave. Is it safe to assume
that this vehicle will make the turn?
3. True or False? You should use your low beams in fog, snow, or heavy rain.
4. What procedures should you follow when you are having car trouble and must stop?
5. What is a safe speed?
6. AT 50 MPH it takes about ________ feet to stop?
7. What traffic signs are almost always yellow, and diamond shaped?
8. Unless otherwise posted at what speed should you travel when driving through a business
district?
9. What should you do if you are driving along in the rain, snow or fog, and begin to have
difficulty seeing either ahead, beside or behind you?
10. When following trucks, tractor trailers and buses, what driving considerations should you
keep in mind?
11. True or False? The driver behind you has more control over the space directly behind you
than you do.
9-1
SECTION 9
Avoiding Crashes
Emergencies and Avoiding Crashes
If you do all the things this manual says, you may never have an emergency. But no one is
perfect so chances are unexpected things will happen. If you are well prepared, you will be able
to react correctly and quickly enough to avoid an accident. When it looks as if a collision may
happen, many drivers simply hit the brakes as hard as they can. This only locks the wheels, puts
the car in a skid, causes you to lose control, and makes things worse.
Braking may be the right thing to do, but it is not the only thing to do. When that emergency
occurs, if you are prepared, you may be able to avoid a crash. You have three ways to avoid a
crash or reduce its impact; braking, steering, or speeding up.
Braking
The first action for most drivers is to stop. Pumping the brakes is generally the best way to stop
the car in an emergency. Pumping allows the car to stop quickly while allowing you to continue
steering. If you have anti-lock brakes, simply hold the pedal down firmly and let the car do the
work. Many new vehicles have ABS (Anti-lock Braking Systems). An ABS braking system
helps you stop without skidding. It helps to maintain steering control. Be sure to read the vehicle
owner’s manual on how to use the ABS. Rules for using ABS are:
• Press on the brake pedal as hard as you can and keep applying pressure.
• ABS only work if you keep pressure on the brake pedal. The pedal may vibrate, and you
may hear a clicking noise. This is normal.
• You can still steer with the ABS engaged.
• If the car begins to skid, quickly let up on the brake. Then quickly push it down again.
• Use this quick pumping action until the car has stopped.
Controlled braking stops the car even faster but requires more skill. You need to get a feel
for the brakes and the steering. Push down the brake pedal until just before the wheels lock (if
you don’t have ABS), or until you feel a need for more steering control. Then, release the brakes.
Repeat these moves until the car comes to a complete stop.
If your vehicle does not have ABS, refer to your vehicle’s owner’s manual for how to best use
the brakes.
Steering
You may be able to avoid a collision by steering around a hazard. If you can see that you won't
stop in time to avoid hitting something, turn away from it. Concentrate on the steering. If you
can, stay off the brakes while turning. This lessens the chance of a skid, particularly if you are
turning onto a soft shoulder.
9-2
To be able to turn quickly you need to hold the steering wheel correctly. Your hands must be on
opposite sides of the steering wheel, at the 9 and 3 or 8 and 4 clock positions. Get used to
holding the steering wheel this way all the time.
To avoid an accident, turn away from the obstacle. Once you clear it, turn the steering wheel in
the opposite direction to get back in your lane but be ready to turn back again quickly if need be.
This is sometimes called “swerving.” To quickly steer around a problem:
• Make sure you have a good grip with both hands on the steering wheel.
• Steer in the direction you want to go but try to avoid other traffic.
• Once you have missed the hazard, straighten your vehicle and slow down.
Use caution when ‘swerving’ because many people steer away from one collision only to
end up in another.
Speeding Up
Sometimes it is necessary to speed up to avoid a collision. This may happen when another car is
about to hit you from the side or from behind. In a car with manual transmission, you may need
to shift into a lower gear and push the gas pedal to the floor. If the car has an automatic
transmission, you can do the same thing by simply pushing the gas pedal to the floor.
It is illegal for an operator to read printed material while driving a motor vehicle. Printed
material does not include a map or written directions to a specific location.
Protecting Yourself in Collisions
You may not always be able to avoid a collision. Try everything you can to keep from
getting hit. If nothing works, try to keep the injury from being too serious:
If you are about to be hit from the rear:
• Be ready to apply your brake so that you won't be pushed into another car.
• Brace yourself between the steering wheel and seat back.
• If your car has head restraints, press the back of your head firmly against the head
restraint.
If you are about to be hit from the side:
• Brace yourself with the steering wheel to keep from being thrown against the side of the
car.
• Get ready to steer quickly so that if the car spins around you can attempt to control the
vehicle.
If you are about to be hit from the front:
• If you are wearing a shoulder strap, use your arms and hands to protect your face.
9-3
• If you are not using a shoulder strap, throw yourself across the seat so that you don't hit
the steering column or the windshield.
Accidents
If you are involved in an accident:
• Stop your car at once and render all possible aid to any injured people and send for an
ambulance if needed. Do not move an injured person unless there is another danger that
would require them to be moved to safety.
• Stay at the scene until the police arrive and have questioned everyone involved.
• If you can, move your car off the road so that you do not block traffic.
• Get the names and addresses of all people involved in the accident and any witnesses.
Also make sure to get the names and addresses of any injured persons.
• Record the other driver's information:
o Name and address (make sure the driver's name is the one on the license)
o Make, model and year of car
o Driver's license number
o License plate number
o Insurance company name
o Damage to his or her car
Make note of:
• The time, date, and place of accident
• The position and direction of travel of cars and pedestrians before and after the crash
• Bad weather or roadway conditions
• Always contact the police if there is any injury. Give the police information about the
accident at the time of the accident. Give just the facts.
• If a parked car is damaged, try to find the owner. If the owner can’t be found leave a note
in a place where the owner can find it. The note should contain:
o Your name and address
Driver's license number
License plate number
o Date and time of accident
o A description of property damage
If the accident involves any injuries, or property damage of $1,000 or more, the drivers must
report it to the police or local sheriff. Failure to report an accident may result in criminal charges
and a driver's license suspension.
Operators involved in non-reportable accidents involving injury or death of a dog, a cat or
livestock must “take reasonable steps” to notify the owner, or if the owner cannot be located,
local law enforcement or animal control.
9-4
Emergency First Aid
If you are involved in or come upon a personal injury accident and no one else is on the scene,
you should try to help the victims. If emergency medical assistance is already on the scene,
follow their instructions and pay attention to the road and traffic control officers, not the
accident.
Here are some basic first-aid tips to use if emergency help is not immediately available:
• Don't move the victim unless absolutely necessary due to a fire or other life- threatening
danger. If you must move the victim, keep the back and neck as straight as possible by
putting your arms under the victim, grab ahold of their clothing and pull the victim head-
first away from danger.
• If downed wires are present, don't go near them. Wait for emergency crews to handle the
situation. If the wires are touching the vehicle or lying near it, warn occupants to stay
inside until help arrives.
• Check to see if the victim is breathing, if not, begin cardiopulmonary resuscitation (CPR),
if you have been properly trained, or mouth to mouth breathing.
• You can help stop bleeding by putting pressure directly on the wound with your hand or a
clean cloth, if available. Maintain pressure until help arrives. If the wound is in an arm or
leg and there are no apparent broken bones, also carefully lift the limb to help slow
bleeding while maintaining pressure on the wound.
• Do not put ointment or grease on burns. You may apply cold water to burns and cover
them with a clean cloth.
• Do not give an injured person anything to drink, not even water.
• Cover the victim with a blanket or a coat to maintain body temperature and help prevent
shock.
Skids
Skids happen when you are traveling too fast or when you brake too hard. Skids happen
whenever your tires cannot grip the road. While the tires are skidding you will not be able to
steer. If your vehicle begins to skid:
• Release pressure from the brake or accelerator to regain steering.
• Look where you want to go.
Drop Offs/Uneven surfaces
Drop-offs can cause crashes unless you handle them right. Don’t panic if your wheels drop off
the paved road surface. Slow down gradually and then turn back onto the road.
If the right wheels of your car unexpectedly run off on to the shoulder of the road:
• Don't panic! Grip the steering wheel firmly.
9-5
• Ease up on the gas pedal.
• Don't hit the brake pedal suddenly and hard. Step on the brakes gently.
• After you've slowed down, you can steer back onto the road. Before doing so, check the
road for traffic ahead and behind, then turn your wheels to reenter the road.
Vehicle Problems
There is always a chance of having something go wrong with your vehicle. You can avoid most
breakdowns by following the maintenance schedule in your owner’s manual. No matter how
well you take care of your car, or how carefully you drive, there is always a chance that your car
will fail and that you will be forced to deal quickly with both an unpleasant and unexpected
situation. They can all be overcome or minimized if you know what to do. The following
paragraphs note some of the more common car failures and how best to deal with them.
Knowing what to do could save your life.
Brake Failure
A brake warning light tells you that your brakes are not working. Do not drive if you see this
warning light. If your brakes stop working while driving:
• Pump the brake pedal rapidly and hard several times. If that doesn’t work…
• Use the parking brake. Apply the parking brake slowly to avoid locking the rear wheels.
Be ready to release the brake if you start to skid.
• Shift to a lower gear and look for a place to slow to a stop.
• Use your horn and lights to warn other drivers.
• If the parking brake fails, turn off the engine and look for a safe place to stop. Make sure
the vehicle is parked well off the road.
• After the car has stopped, call for help. Do not drive without brakes.
Wet brakes:
• Always test the brakes after driving through deep water. The brakes may pull you to one
side, or they may not work at all.
• "Dry" the brakes by driving slowly and putting your brakes on lightly for a short distance.
Tire Blowout
If a front tire blows out, your vehicle will pull hard toward the blown tire. If a rear tire blows out,
the vehicle will wobble, shake, and pull toward the blown tire. If a tire goes flat:
• Don't panic or slam on the brakes.
• There may be a strong pull to the right or left.
• Grip the steering wheel firmly and steer straight.
• Slow gradually. Take your foot off the gas pedal.
• Allow the vehicle to slow down by itself. Brake gently only if you must.
9-6
• Do not stop on the road. Pull off the road in a safe place and turn on the emergency
flashers.
Stuck Gas Pedal
If your vehicle is speeding out of control:
• Keep your eyes on the road.
• Shift to neutral.
• Steer smoothly and gently put on the brakes.
• Find a safe place to pull off the road.
• As you bring your car to a stop, turn off the engine.
• If you cannot free the pedal so that it does not get stuck again, call for assistance and do
not try to drive the car.
Breakdowns
If your vehicle breaks down, make sure that other drivers can see it. Crashes often happen
because drivers do not see a disabled vehicle until it’s too late to stop.
If you have a breakdown:
• Get your vehicle off the road and away from traffic.
• Turn on your emergency flashers.
• Warn other roadway users. Put emergency flares 200 to 300 feet behind your vehicle.
Give other drivers time to change lanes or slow down.
• Call the police about the breakdown.
If your engine floods:
Engines become flooded when there is too much gas in the cylinders. This condition makes it
impossible for the gas to burn.
• Press the gas pedal to the floor and hold it there. Do not pump the gas pedal.
• Turn the key and let off on the pedal when the engine starts.
• If this doesn't work, wait about ten minutes, and then repeat the above.
If your car stalls on railroad tracks:
If a train is coming and you are not having any success moving your vehicle, stop trying and get
away. To avoid debris from any crash, leave your vehicle and head quickly toward the oncoming
train and away from the tracks at a 45º angle. When you are safely away from the tracks, call the
railroads emergency phone number (look for nearby blue sign with emergency number).
If there is an oncoming car in your lane:
9-7
• Blow your horn and flash your lights to warn the other driver.
• Brake quickly, but not so fast that you lock your wheels and lose control.
• Quickly pull off into the right shoulder or ditch. Do not drive into the left lane.
If your car battery dies:
• Attach one jumper cable to the positive terminal of the dead battery.
• Attach the other end of the cable to the positive terminal of a working battery.
• Attach the other cable to the negative terminal of the good battery.
• Attach the last clamp to the engine block of the stalled engine.
• Start the car with the good battery.
• After a bit of charging start the car with the dead battery.
• Allow both cars to run for a few minutes to more fully recharge the dead battery.
• Once the car is started, remove the clamps in the reverse order that the connections were
made.
• Never smoke when jump-starting a vehicle and make sure that your eyes are protected.
If your vehicle plunges into water:
A car with windows and door closed may float from 3 to 10 minutes. The best escape route is
through a window, because water pressure makes it hard to open a door. If your car has power
windows, open them as soon as possible, because the water will cause a short circuit in the
electrical system.
Section 9 practice questions:
1. In avoiding a collision, a driver has three options. What are they?
2. What should you do if your vehicle stalls on railroad tracks?
3. If your brakes become wet after driving through deep water, you can "dry" them
by______?
4. What is the first thing you should do when confronted by an oncoming vehicle in
your lane?
5. What is the first thing you should do if you are involved in an accident?
6. True or false? Always contact the police if you are involved in an accident in
which someone is injured.
7. Should you try to pull injured victims from a vehicle that has been involved in an
accident?
10-1
SECTION 10
Sharing the Road
Everybody has a right to the roadway. Remember to be courteous. Communicate to let others
know where you are and what you plan to do.
Pedestrians
As a driver:
• You must yield the right-of-way to any person crossing the street in a marked
crosswalk.
• Always yield to pedestrians even if they are not in a crosswalk.
• When traffic-control devices are not in operation, an operator must yield the
right-of- way to a pedestrian crossing within a marked crosswalk.
• Be aware of pedestrians crossing at mid-block crosswalks. They may not be
marked by warning signs and road markings.
• Always yield to the vision impaired. When a pedestrian is crossing a street with a guide
dog or carrying a white cane, you must come to a complete stop.
• Yield to all pedestrians even if the traffic light is green.
• You must not overtake or pass other vehicles stopped or slowing to yield
to pedestrians in a crosswalk.
• When making a right or left turn (rarely allowed in Maine) on red, you
must yield to pedestrians.
• Watch for pedestrians when driving next to parked or stopped vehicles.
• Check for pedestrians before backing, especially in parking lots.
• Slow down near playgrounds and in residential areas. Children can run out from between
parked vehicles so be ready to stop quickly.
• In a school zone when lights are flashing or children are present outside, you must obey a
slower speed limit. At school crossings where there is a crossing guard you must stop and
yield as signaled.
• Use extreme caution where children are playing or walking.
• When crossing a sidewalk, you must yield to all pedestrians or bicyclists on the sidewalk.
• Despite all laws, you must exercise care to avoid colliding with pedestrians or bicyclists.
Bicycles
Bicycles are considered vehicles. Bicyclists must follow the same rules of the road as other
vehicles. A bicyclist has the same rights and responsibilities as vehicle drivers. There are nearly
900,000 bicycles in Maine and most bicycling is done on the roadways of Maine. As a motorist
10-2
you should drive defensively around a bicyclist because the slightest mistake by you or the
bicyclist could result in an injury or death. The biggest differences between bicyclists and
motorists as road users are that bicycles are less visible, quieter, and do not have a protective
vehicle casing around them. This means you need to look a little harder and drive a little more
cautiously when encountering bicyclists.
Bicycles are hard to see in traffic. Search for them and be extra careful around them. Bicyclists
have varying skill levels. A skillful rider is predictable and holds a steady line. An unskillful
rider may swerve without notice, ignore traffic signs and signals, and ride without a light at
night. Be ready for sudden turns by the bicyclist.
Here are some rules to help you share the road with bicyclists:
• Share the road with bicyclists; they have a legal right to its use.
• Be courteous and cautious even if it delays you a bit.
• Yield to bicyclists at intersections, just like you do for
pedestrians and other vehicles.
• Yield the right-of-way when a bicycle path or bike lane crosses
the road. Do not stop, park, or drive in a bicycle lane unless
you are entering or leaving an alley or driveway.
• Slow and allow as much space as you can when approaching or
passing a bicycle. Leave at least three feet of passing space
between the right side of your vehicle and a bicyclist as you
overtake them. Slow down and let a cyclist clear an intersection before you make a turn.
• Bicyclists should operate on the right portion of the way as far to the right as practical
except when it is unsafe to do so as determined by the bicyclist. In some instances, it is
safest for a bicyclist to "command the lane" by riding toward the center or to the left if
turning.
• Bicyclists may be moving faster than you realize (experienced bicyclists can easily travel
over 30 mph). They also have smaller profiles and sometimes are not noticed in traffic.
Look carefully for bicyclists, especially before turning or opening a car door.
• Learn to recognize situations and obstacles which may be hazardous to cyclists, such as
potholes, debris, and drain grates. Give them adequate space to maneuver.
• Anticipate bicyclists' movements. Bicyclists are supposed to signal their intentions with
hand signals.
• Don’t slow or stop your vehicle suddenly as you can stop more quickly than a bicycle. By
stopping quickly, you could cause a crash.
• In inclement weather, give bicyclists extra trailing and passing room, just as you would
other motorists.
• Reduce your speed when passing bicyclists, especially if the roadway is narrow.
• When a road is too narrow for cars and bikes to ride safely side by side, bicycles should
"take the travel lane," which means riding in or near the center of the lane.
10-3
• A driver of a motor vehicle near a person operating a bicycle may not make a right turn
unless the turn can be made with reasonable safety and without interfering with the safe
and legal operation of the bicycle.
• Do not use your horn close to bicycles unless there is a chance of a crash. Your horn
could startle them and cause them to steer into your path.
• Watch for bicyclists entering your lane. Watch out if you see children riding bikes on the
sidewalk as they may suddenly ride onto the road.
• Do not turn sharply in front of bicycles. Do not force a bicyclist off the road.
• Although bicyclists are required to ride in the direction of traffic, you should look for
them riding anywhere on the road.
• Be extra careful around bicyclists when the road is wet or has sand or gravel. These
things affect bicycles much more than other vehicles.
• Cooperate with bicyclists. They must use hand signals when turning and stopping. They
may not be able to signal if conditions require both hands on the handlebars. Look for
other clues of what they plan to do. Riders usually turn their head or look over their
shoulder before changing lanes or turning.
Stop Left Turn Right Turn or Right Turn
• When parked on the street, check to the sides and rear for bicycles before you open your
door. When opening the vehicle door, the “Dutch Reach” method is recommended. Using
the Dutch reach method, the driver will open their door using the right hand. Using the
right hand causes the body to twist left which forces the driver to look over their road-
side shoulder making it easier to see oncoming bicyclists.
• Check for bicyclists in your path before backing up. Be extra cautious near schools or
residential areas where riders may be present.
• Children or inexperienced adults on bicycles are often unpredictable in their actions.
Expect the unexpected.
Bicycle Operation
Bicyclists are vehicles and have all the rights and responsibilities of other vehicle drivers.
Although a license isn't required to drive a bicycle on Maine's roadways, bicycle drivers must
obey all the rules of the road. If you break any traffic laws, like riding a bike on the left side of
the road, running a stop sign or traffic light, you are subject to fines.
10-4
Be sure to practice on your bicycle before entering traffic. Never ride in traffic above your skill
level. When riding a bicycle follow these rules:
• Regularly inspect and maintain your bicycle. Bicycles, like any machine, must be
properly maintained so it will perform correctly. Be safe and keep your bike tuned up or
take it to a bicycle shop for inspection regularly (a professional inspection is
recommended every six months.)
• Properly secure loads. Never hang bags or packages on your handlebars or hold them in
your arms. Secure loads on a rack, in bike bags, or on a bicycle trailer. Only use back
packs for light loads.
• Wear a helmet correctly. When worn correctly, a bicycle helmet can reduce your
chances of head injury in an accident. Only use an ANSI/Snell approved helmet designed
specifically for bicycling. Once a helmet has sustained any impact it should be replaced.
Helmets should also be replaced if they are five years old or older or are left in a hot car.
Worn correctly, a helmet should be set just above your eyebrows and is snug on your
head so that it stays in place if you shake your head. If your helmet is loose or tilted back
exposing your forehead it cannot adequately protect your head. All persons under 16
years of age riding on bicycles are required to wear helmets and sit on passenger seats
when traversing public ways.
• Ride with traffic. Always ride on the right side of the road. Do not pass motorists on the
right side. If you approach an intersection with a right turning lane and intend to continue
straight, do not enter the right turn lane. Ride with the through traffic.
• Watch for potential road hazards. Always scan the road 50 to 100 feet ahead for road
hazards like drain grates, potholes, railroad tracks (cross them at right angles), puddles
(which may be hiding a pothole), or road debris. Slow down and allow time to maneuver
around these hazards and negotiate with traffic.
• Avoid opening car doors. Give yourself three or four feet of room between yourself and
parked vehicles.
• Ride in a predictable manner. Always ride straight and be predictable. Do not weave from
side to side, or suddenly move out into traffic. Be alert and plan to avoid obstacles. If the
road is narrow for a bicycle and a car to travel side by side, the bicyclist should occupy
the lane until it is safe to move back to the right. Always check over your shoulder before
changing your lane position. Never weave between parked cars.
• Signaling turns. As a vehicle driver you must always signal your intent to turn, using the
hand signals illustrated earlier in this section. Look before you make a lane change or
turn. Make sure lanes are clear of traffic to safely make a lane change or turn.
• Left hand turns. You may turn left as a vehicle by moving into the left lane or the left side
of the travel lane. Before you maneuver, look behind for traffic, signal your turn and
change lane position when clear to do so. Or, you can make a left turn in two parts by
crossing straight across the intersection and then pulling over to the side. Now, when it is
safe to do so, turn to your left and proceed across the intersection.
• Night equipment. A bicycle must have a front light that emits a white light visible from a
distance of at least 200 feet to the front. Also, a red or amber light or reflector to the rear
that is visible at least 200 feet to the rear. Reflector material is recommended on the
pedals, unless the bicyclist is wearing reflective material on the feet or ankles.
• Be prepared for conditions. Always carry water and appropriate clothing when traveling
by bicycle. In the rain, allow yourself extra stopping distance when you use your brakes.
10-5
Motorcycles or Mopeds
Motorcyclists have the same rights and responsibilities as other drivers. This section covers basic
information on motorcycles and mopeds. A separate study manual is available to prepare for a
motorcycle endorsement/license test. There is specific
information you need to know to safely share the road with
motorcycles:
• Give motorcycles a full lane. Do not attempt to share the
lane. Motorcycles need space to react to other traffic.
• Motorcycles are smaller so more difficult to see. Always
check your mirrors and blind spots for them.
• Before turning left be alert for motorcycles. Look carefully to the front and sides.
• Do not believe a motorcycle is turning when it has a turn signal
flashing. Turn signals on a motorcycle may not self-cancel so
the rider may have forgotten the signal is on.
• When following a motorcycle, stay at least 4 seconds back.
When it is wet, increase the following distance. Riders may
suddenly change speed or lane position to avoid potholes,
gravel, wet or slick places. They may also change speed or
direction because of pavement seams, railroad crossings and
grooved paving. All of these can be deadly to a motorcyclist.
• Remember that scooters and mopeds travel at much lower speeds than motorcycles.
There are more and more motorcycles on the road. They have as much right to the road as cars.
Give them as much space as you would give a car. When you pass a motorcycle, give it a whole
lane. Don't try to squeeze past in the same lane. The motorcyclist moves from side to side
quickly, to see and be seen, and to avoid objects on the road.
Motorcycles give their riders no protection. Therefore, they are involved in nearly 10%
of all motor vehicle deaths, although they make up only 4% of the vehicles on the road.
In many motorcycle accidents, drivers of other vehicles are at fault. Drivers turning left in front
of an oncoming motorcycle cause many of the accidents. They fail to see the motorcyclist, or
they think the motorcycle is going slower than it really is.
Wait for an oncoming motorcyclist to pass before turning left.
Large Vehicles
Over 250,000 crashes occur between cars and large vehicles each year. A few simple precautions
will help prevent problems between cars and large vehicles, such as trucks and buses. Bus and
truck drivers face special challenges because of the large size and weight of their vehicles. Many
crashes could be avoided by keeping the following points in mind:
10-6
• Large vehicles are bigger and harder to handle than a car.
• Larger vehicles have much larger blind spots than cars. Drivers of large vehicles rely
mostly on their mirrors to gather information on what is beside and behind them. Even
though trucks and buses have many mirrors, there are still areas around the vehicle which
the driver has difficulty seeing. Some of these areas are impossible to see and are known
as blind spots. All vehicles have blind spots, even automobiles, but with large vehicles
there are many such areas and they may be rather large.
• Never attempt to pass behind a truck or bus that is backing.
• If you cannot see the mirrors of the large vehicle ahead of you, the driver probably can't
see you so stay out of the blind spots.
• They take more space to speed up, stop and turn.
• The weight of large vehicles means that the speed of these vehicles might sharply
increase or decrease according to the terrain. This change in speed is much greater for
large vehicles than automobiles. The speed of a large vehicle might drop sharply when
the vehicle is going uphill; this same vehicle might often gain speed quickly when
starting downhill. The basic rule about space, however, still applies so avoid actions
which take space from the driver of a large vehicle which they need to operate safely.
• Stopping distances are much greater for heavier vehicles than for automobiles. Be sure
that there is plenty of room between you and large vehicles that are traveling behind you.
Always leave plenty of space between you and vehicles ahead of you when being
followed by a large vehicle. This will give you plenty of time to react as well as the
driver of the large vehicle behind you should something unexpected occur.
• Never pass or pull in front of a large vehicle that is already slowing or stopping. The
driver has based their braking ability on the space ahead. If you suddenly pull in the lane,
you have compromised the driver's braking ability and could cause an accident.
• Another challenge arising from the size of trucks and buses is that of making turns. Right
turns can be especially difficult. Many times, large vehicles will be forced to swing to the
left before turning to the right. This is necessary to clear the sidewalk or any objects, such
as a telephone pole, that may be on the side of the road. Drivers of automobiles must be
watchful for this maneuver and avoid driving into the turning path of the truck or bus.
• Watch for the positioning of the larger vehicle and the path the vehicle seems to be taking.
Also watch for directional signals of the large vehicles. Many times, the signal may be the
only indication that the vehicle is about to turn right when it seems to be moving left.
10-7
The No-Zone
The No-Zone is the area around larger vehicles that is in the driver’s blind spots. These blind
spots are on the sides, rear and front.
• Side No-Zones – Large trucks and
buses have big No-Zones on both
sides. A trucks largest blind spot is
on the right side. It starts behind
the cab and goes the length of the
truck. If you cannot see a driver’s
face in the side view mirror, they
cannot see you. Do not drive alongside a large vehicle any longer than you must. If the
driver needs to swerve or change lanes suddenly you could collide.
• Front No-Zones – Because they are so big and heavy larger
vehicles take longer to stop than cars. A loaded truck at 55
mph takes at least 335 feet to stop. That’s more than 1 ½ times
the stopping distance a car would need. Never merge in front
of a moving larger vehicle or change lanes too closely in front
of them. When passing, make sure you can see the whole
front of the vehicle in your rear-view mirror before pulling
back into the lane the larger vehicle occupies.
• Rear No-Zones – Large vehicles have huge blind spots-up to 200
feet behind them. If you are too close, the driver cannot see your
car and you cannot see what is ahead of you. Some driver's
"draft" off a large vehicle. This is the practice of following so
closely behind a truck thinking the wind drag created by the
truck will pull your car along. Do not do this. Not only does it
not work but it is extremely dangerous. Stay to the left in your
lane so the driver can see you in their side mirror. When stopped
behind a large vehicle on a hill, leave space between your car and the larger vehicle and
be aware that the large vehicle may stall or roll backwards as they pull forward which
may cause a collision with your car.
Turning and Oncoming Large Vehicles
10-8
Watch for large vehicles’ turn signals and give them lots of room. Large vehicles sometimes
swing wide to the left to clear a curb on a right turn. Avoid a crash by not turning until the larger
vehicle has finished its turn.
Keep in mind:
• Avoid wind blast when you meet a truck by moving as far as you can to the rightmost
portion of your lane.
• Many crashes with large vehicles occur at intersections. Drivers often misjudge the
vehicle’s speed before turning left. If you are not sure about the speed of an oncoming
truck it is safer to wait until they have gone by before turning. The truck may be going
faster than you think and it also takes much longer for a larger vehicle to stop.
• Stop lines at intersections are designed to give larger vehicles more turning space.
Always stop behind the stop lines.
• Do not cut in front of a truck in traffic. Do not try to beat a truck into a single-lane
construction zone. Trying to save a few seconds could cost you your life.
Maintaining Space
• Just as with automobiles, the space requirements of large vehicles are much greater when
road conditions are bad. Remember when driving in poor weather conditions or when
visibility is limited to give large vehicles an extra margin of space on all sides. When the
road conditions are poor, forcing the driver of a large vehicle to use the brakes can lead to
skids or jackknife situations.
• Most professional drivers understand the dangers of excessive braking when the roads are
slick; the drivers of automobiles should remember to avoid actions which will force the
bus or truck driver to use their brakes any more than necessary under such conditions.
This is simply another way of giving large vehicles the extra space they need to operate
safely.
• When you are immediately behind a large vehicle, do not follow too closely (tailgate). A
good rule to follow is that if you cannot see the mirrors of the large vehicle you are
following, you are too close and, in the driver’s blind spot. If you follow too closely it
also limits your visibility of the road ahead. If the driver of the large vehicle should have
to stop quickly, you will be at risk.
10-9
• Always dim your headlights when following a large vehicle at night. Bright lights will
reflect off the mirrors of the large vehicle and make it difficult for the driver to see the
road ahead.
Passing
• Before passing a large vehicle be sure to check ahead, behind and in the direction you
will move. This is necessary to be sure that you have enough room to complete the
maneuver.
• Never pass unless in a legal passing zone and don't pass if you must speed in order to
complete the maneuver.
• When you have passed a truck or bus, do not pull back into the lane until you can clearly
see the front of the vehicle in your rearview mirror. Also, be sure to check your blind spot
by looking over your shoulder before returning to the right lane.
• Because of the size of large vehicles, at highway speed the vehicle will push a cushion of
air to the side and rear. When a large vehicle is passing you, stay as far to the right of
your lane as possible until the vehicle is clear. This rule also applies when a truck or bus
is approaching you from the opposite direction.
• Do not speed up when a large vehicle passes you. Maintain your speed or slow down
slightly to allow the larger vehicle to pass.
• When the roads are wet, it is a good idea to have your windshield wipers on before large
vehicles pass you. These vehicles tend to create a lot of spray which can severely
diminish your ability to see the road ahead.
Emergency Vehicles
Emergency vehicles have sirens, flashing lights and special horns to help them move through
traffic. Make room for ambulances, fire trucks, police cars, and other emergency vehicles. These
vehicles often move at high speeds and use lights and sirens to clear the way for themselves. At
such times, this requires that you pull over to the side of the road and stop. If you are at an
intersection, get out of it before you pull over. It is unlawful to follow within 500 feet of any fire
truck responding to a fire alarm.
You must yield to an emergency vehicle when the flashing lights and siren are on. Pull over
to the edge of the road and stop so they may pass. Avoid blocking intersections.
Police/Traffic Stops
If you are pulled over by the police:
10-10
• Move to the right side of the road. Make sure you are in a safe spot.
• Stay in the vehicle unless asked to get out.
• Turn off your engine. Turn on your hazard flashers. At night, turn on your inside lights so
the officer can see inside the vehicle. Roll down your window so that you and the officer
can talk.
• Remain calm. Keep your safety belt fastened. Ask your passenger(s) to do the same.
Keep your hands on the steering wheel.
• The officer may ask for your license, insurance card or vehicle registration. Tell the
officer where they are located and reach for them slowly with one hand on the wheel.
• Answer the officer’s questions.
• Never try to run from the law. Many fatal crashes result from police chases.
Move-Over Laws
When you encounter an emergency vehicle that is stopped on the roadside you must slow and
yield the right-of-way. If possible, move over to the next lane. If a lane change is not safe, slow
down and use caution as you drive by the emergency vehicle.
Slow Moving Vehicles
Watch for slow moving vehicles, especially in rural areas. A fluorescent or
reflective orange and red triangle displayed on the rear indicates that the vehicle
is moving less than 25 mph. Use caution when you see a slow-moving vehicle
and be sure it is safe before you pass.
10-11
• Farm machinery – Watch for farm equipment moving across the road
or driving on state highways in rural areas. Pass with care. Remember
that the driver may not see or hear your vehicle.
• Animal drawn vehicles and horseback riders – Animals driven, ridden,
or led along the side of a roadway are easily frightened by passing
vehicles. They are usually even less predictable than people in their
reactions, tending to rear, swerve or stop suddenly when startled. The alert motorist can
prevent accidents by anticipating potentially dangerous situations and slowing down and
proceeding cautiously when approaching or passing animals. You may have to share the
road with horse drawn vehicles or horseback riders. They have the same right to the
roadway as a motorist does. They must follow the same rules as vehicles do. Pass with
care. Do not use your horn or “rev” the engine when near an animal as this may scare
them and cause a crash. It is against the law to purposefully frighten any animal being
ridden, driven, or led on or near a public way. Watch out for left turns into fields and
driveways. Warning signs may be posted in areas where you are likely to find horse
drawn vehicles and horseback riders. Be alert when in these areas.
Section 10 practice questions:
1. When encountering bicyclists, how should you drive?
2. True or False? Bicyclists are vehicle drivers and have all the same rights and
responsibilities as drivers of motor vehicles?
3. When passing a bicyclist, how much room should you give?
4. When encountering an emergency vehicle that has its’ emergency lights and siren
activated what is a motorist required to do?
5. How many ‘no zones’ are there around a large truck?
6. When are you required to yield to pedestrians crossing the street?
11-1
SECTION 11
Special Driving Challenges
Night Driving
Driving at night is harder and more dangerous than driving in daylight.
The distance you can see is limited. Some tips for driving at night are:
• Use your high beams if there are no oncoming vehicles. High
beams let you see twice as far as low beams.
• Dim your high beams for oncoming traffic. If an oncoming
vehicle does not dim their headlights, look towards the right
side of the roadway. This helps you to avoid being temporarily
blinded by oncoming headlights.
• Use your low beams when following another vehicle.
• In fog, rain, or snow, use your low beams to avoid glare. Some
vehicles are equipped with fog lights.
• Avoid looking directly into the headlights of other vehicles.
Instead keep scanning the roadway around your vehicle.
• Search well ahead of your headlight beams. Looking for dark
shapes in or near the roadway.
• Glance to the right and left to check the edges of the pavement
and for possible hazards to the sides.
• Do not wear sunglasses or colored lenses at night or on cloudy
days. Tinted or colored lenses reduce the light you need for
good vision.
• Increase your following distance by at least a second at night. Add at least two seconds
for night driving on unfamiliar roads.
Work Zones
You probably have noticed construction and maintenance projects on the state's public road
system, work that is being done to improve and repair our roadways. Because closing a road and
detouring traffic adds expense and travel time, the work must go on while traffic passes through
the work site or in nearby lanes.Work zones may involve lane closings, detours and heavy
equipment moving on or near the road.
11-2
Watch out for signs, cones, barrels, large vehicles, and workers
in work zones. Always slow down even if no workers are
visible as narrow lanes and rough pavement can be a hazard.
Flashing Arrow Panels: Large flashing or sequencing arrow
panels may be utilized if a lane ahead is closed. Prepare to slow
down and move into the lane indicated.
Construction Warning Signs: These signs are posted
to alert drivers of road construction or maintenance
activity ahead. They also serve to guide a motorist
safely through or around the work site. These signs
are black symbols or lettering on an orange
background and are often diamond shaped.
Channeling Devices: Barricades, vertical panels, concrete
barriers, drums, and cones are the commonly used devices to
guide drivers safely through a work zone. When driving near
these devices, keep your vehicle in the middle of the lane and
maintain a responsible speed. As you leave the work zone stay in
your lane, maintain your speed, and don't change lanes until you
are completely clear of the work zone.
11-3
Flaggers: Flaggers wear high visibility vests, shirts or jackets and
use a stop/slow paddle and hand signals to control traffic through
the work zone. Usually a flagger is stationed on each end of the
work zone to let the two directions of traffic alternately travel
through the work zone. Be patient and always obey the signals of
a flagger. They normally wear orange vests, shirts or jackets and
use red flags or paddles to direct traffic safely through the work
zone and to allow workers or construction vehicles the
opportunity to cross the road. It's very important to be patient and
obey the signals of a flagger.
In a work zone:
• Slow down, increase your following distance and be prepared to stop.
• Be very careful when driving through a work zone at night even if no workers are there.
• Stay well away from workers and construction vehicles.
• Obey the posted work zone signs until you see an “End Road Work” sign.
• Expect delays, plan for them, and leave early so you can finish your trip on time.
• Use a different route to avoid work zones if possible.
Rural Roads
Driving on rural roads can be dangerous. Stay alert, watch for warning signs, and obey the speed
limit. Some problems and driving hazards are unique to rural roads:
• Gravel or Dirt – There is less traction on gravel or dirt roads. Slow down and increase
your following distance as these surfaces may cause a skid when stopping your vehicle.
• Narrow roads – Rural roads are narrower and may have ditches or drop offs instead of
shoulders. Slow down and center your vehicle in your lane. Look for oncoming traffic
that may be in or crowding your lane.
• Narrow bridges and single lane bridges – When crossing a single lane bridge the first
driver to the bridge has right-of-way. Take turns when crossing the bridge.
• Open Bridge Gratings or Steel Bridges – Reduce your speed, increase your following
distance, and keep a firm grip on the steering wheel.
• Limited view – Wooded areas, crops growing in fields next to a roadway and steep hills
can block your view. In these areas, slow down and be ready to stop.
• Uncontrolled intersections –These intersections can be very dangerous as they lack
traffic lights, stop or yield signs. Approach them with caution. Slow down and be ready
to stop for crossing or oncoming traffic indicating a turn.
11-4
Hazardous Driving Conditions
Winter Driving
Winter driving has its own special hazards which call for extra
driving skills. On slippery roads, the important points to safe
driving are slower speeds, gentler stops and turns, and
increased following distances. The following are guidelines for
safe winter driving.
• Make sure that your car is in good mechanical
condition before the bad weather hits; breakdowns
during storms are especially problematic. Getting a
tune-up is an important first step in winterizing your
car, it should ensure that your car is in good working
order and maximize its fuel efficiency. Additionally,
make sure that your tires are in good condition, or have
snow tires put on. Also, ask your mechanic to check
your antifreeze, water hoses, exhaust system, battery
charge and brakes. Make sure that your oil is of
sufficient weight to perform in the winter and that your
battery terminals are clean.
• Although it is important not to begin driving before
your engine is warmed up, don't warm it too much.
Thirty seconds is usually enough time to allow your
engine to idle. Even a cold engine will warm up faster
when being driven than when left to idle for long
periods of time. When it is extremely cold, drive at
slower speeds for a few miles.
• Get the feel of the road. Try the brakes occasionally
while driving slowly. Determine just how slippery the
road is and adjust your speed accordingly. Never slam
on the brakes; this can cause your wheels to lock and
throw you into a skid.
How to steer out of a skid
Stay off the brake. If you brake hard, your wheels will lock and that makes the skid worse.
Turn the steering wheel in the direction you want the car to go as this will line the front of the car
up with the back.
As soon as the car begins to straighten out, turn the wheel back the other way so that the car
won't over correct.
If you fail to turn the wheel back, you will start a new skid.
Continue to correct your steering, left and right, until you recover completely from the skid.
11-5
Look for something to stop you. If you can't control your car on a slippery surface, try to find
something to stop you. Try to get a wheel on dry pavement or on the shoulder of the road, or
slowly edge into a snowbank or some bushes.
• When stopping on icy or snow-covered roads, pump brakes on and off very gently. Be
sure to release the pressure on the brake at the first hint that the wheels are starting to
slip. Do not release the clutch or take the vehicle out of drive until the vehicle has almost
completely stopped. When stopping a car with anti-lock brakes, simply press firmly on
the brake pedal (follow instructions in owner's manual).
• Follow at a safe distance. Keep well behind the vehicle ahead of you, giving yourself
plenty of room to stop. Remember that on snow or ice it takes three to twelve times as
much distance to stop your car as it does on dry pavement.
• Slow down when approaching hills and curves. Make turns gradually, moving the
steering wheel carefully.
• Keep the windshield and windows clear. Make sure that your windshield wipers,
defroster, and headlights are working and that you have plenty of wiper fluid.
• If you should get stuck, don't spin your wheels. Keep them as straight as possible, shovel
snow out from around them and use traction mats, sand, or cat litter to provide extra
traction. If you still can't pull out, rock the vehicle by going back and forth from reverse
to drive and you should be able to roll out.
If you must wait for help:
• Stay with your car. Most deaths occur when people leave the car, get lost, and freeze to
death.
• Put a red flag on your radio antenna or driver's door handle and, if available, place flares
to the front and rear of your car.
• Wrap any passengers and yourself in blankets or any warm clothing which is handy.
• Run the engine and heater until the car is warm, and then shut it off. Repeat this when
you start to feel cold again.
• Crack your windows slightly to allow a supply of fresh air and keep the exhaust pipe
clear of snow to avoid carbon monoxide poisoning.
• Keep yourself and your passengers as active as possible. DO NOT LET ANYONE GO
TO SLEEP.
Prepare for winter by placing the Following Items in Your Vehicle:
• Shovel
• Flares and a red flag for your antenna
• Ice Scraper
• Jumper Cables
• Bag of Sand
• Warm clothing and footwear
Operators of vehicles under 10,000 pounds shall “take reasonable measures” to prevent
snow or ice from falling off their vehicle while driving
11-6
Fog
The best rule during foggy conditions is to avoid driving. If you must drive, you should:
• Reduce your speed and always be prepared to stop your vehicle within the limits of your
vision, even if those limits are not more than a few feet.
• Turn your headlights on. Put them on low beam to prevent the glaring reflection of your
own lights in the fog.
• Look for road edge markings to help guide you.
• If the fog becomes so thick that you can barely see, pull off the road and stop, using your
emergency flashers. Wait until visibility improves as it is dangerous to creep along at 5 or
10 miles an hour.
Rain
Wet roads can be as dangerous as icy roads, so always reduce your speed during wet road
conditions. When roads are wet you will need more distance for stopping and you may skid
when turning sharply.
Roads are more dangerous at the start of a light rain when road oil and water mix to form a
greasy film on the road.
Rain also creates vision problems. Be sure to keep your windshield wipers and defroster in good
condition.
Make sure you are clearly seen by turning on your headlights.
Signal all turns and begin braking well in advance so other drivers will know what you are
planning to do.
"Hydroplaning", which can cause skidding, can take place when you're driving on wet roads. At
lower speeds, most tires will "wipe" the road surface, the same way windshield wipers clean the
windshield. But, as your speed increases, the tires can't "wipe" the road as well and start to ride
up on a film of water just as a water skier does.
In most cars, hydroplaning may begin at speeds as low as 30 to 40 MPH and the severity
increases with any increase in speed to a point that your tires may be totally riding on a film of
water. In a bad rainstorm, the tires may lose all contact with the road at 50 to 60 MPH. If this is
the case, there is no friction for braking, accelerating, or cornering. Under these conditions a gust
of wind, a curve, or a slight turn of the steering wheel could cause a skid.
To reduce the chances of hydroplaning, you should: slow down during rainstorms, replace tires
as soon as they become worn and keep tires properly inflated.
11-7
Flooded Roadways
Flooded roadways are extremely dangerous to both drivers and passengers. NEVER ATTEMPT
TO DRIVE ACROSS A FLOODED ROADWAY. As little as six inches of water can float some
small cars. Two feet of water will carry away most vehicles. Once a vehicle floats off the
roadway into deeper water, it may roll uncontrollably while filling with water, trapping the driver
and all passengers inside. In the United States, nearly half of all flash flood fatalities are people
who become trapped in their vehicles. In many cases, victims drive right off the edge of an
eroded roadway without knowing that the road is no longer there. Flooded roadways are
especially dangerous at night when it is more difficult to recognize the flood dangers. If your
vehicle stalls in a flooded roadway, leave it immediately and seek higher ground. Remember it's
better to be wet than dead.
Night Driving Reminder: Use extra caution.
The fatal accident rate for night driving is nearly three times greater than for daytime driving,
even though there are fewer miles driven at night. It's good practice to drive slower at night
because overall visibility is much more restricted due to the darkness.
Wildlife Safety
It happens all the time. In Maine, cars and trucks crash into moose and deer thousands of times
every year. It is that big of a problem. Of course, most people are delighted to see a beautiful
white-tailed deer or a majestic bull moose, but few people know how to handle a head-on
encounter with Maine's largest and wildest creatures. Collisions with deer increase in the
autumn, peaking in November - during breeding season. But wildlife collisions can happen any
time of the year.
May and June are Peak Moose Collision Months!
Collisions with moose increase dramatically in the months of May and June. Autumn incidents
are also common but don't let your guard down as wildlife crashes can happen during all 12
months a year.
Tip: Deer eyes reflect light from headlights very well but because moose are so much taller,
drivers typically won't see their eyes reflected in the headlights. This makes moose even
harder to see when it is dark so gives you less time to avoid a collision. Watch for the
reflective eyes of deer and the silhouette of the moose.
From Dusk to Dawn
While wildlife collisions can happen at any time of the day, moose and deer are most active
between dusk and dawn as they tend to travel at night. So be especially alert after sunset because
dark colored animals can be very difficult to see until they are right in front of your vehicle.
11-8
Warning Signs Mean Business
The locations for Maine's moose and deer crossing signs are chosen based on where there are
high concentrations of wildlife and where collisions are a problem.
"Herd" the One About the Traveling Moose?
Moose and deer often travel in small groups. If you see one animal cross the road, you can bet
that there are more animals nearby that may cross as well.
The Moose Standoff
If you see a moose standing in or near the roadway you must use extreme caution, especially
during mating season which runs from August through October. When spotting a moose in or
near the roadway you should:
• Slow Down
• Do not try to drive around a moose
• Stay in your vehicle. Do not get out to observe or to chase the wildlife off the road. By
getting out of the car you could put yourself or other drivers at risk. Moose can be
unpredictable and may attack you or your vehicle
• Give moose plenty of room and give them time to wander off the road.
What if a Crash is Unavoidable?
If a crash with an animal is imminent, apply the brakes and steer straight. Let up on the brakes
just before impact to allow the front of your vehicle to rise slightly while trying to hit the tail end
of the animal. This can reduce the risk of the animal striking the windshield area and may
increase your chances of missing the animal. Duck down to protect yourself from windshield
debris.
Carrying Passengers and Freight
No passenger type vehicle should carry a load which extends over the sides of the vehicle
beyond the line of the fenders on the left side, or extends more than six inches beyond the line of
the fenders on the right side of the vehicle. You must not drive a vehicle if it is so loaded, or
when there are more than 3 persons in the front seat so that your view is obstructed to the front or
to the sides, or so that the load interferes with your use of the vehicle controls. Don't let
passengers sit on the hood, roof or trunk of a moving vehicle.
No person may ride in a camp trailer, mobile home, semi-trailer, utility trailer or trunk of a
vehicle while it is being driven or moved on any highway.
When a passenger, under 19 years of age, is transported in a pick-up truck, that passenger must
ride in the passenger compartment of that pick-up truck unless the passenger under 19 is a:
• Worker or trainee, including agricultural worker or trainee, engaged in the necessary
discharge of their duties or training or is being transported between work or training
locations.
• Licensed hunter being transported to or from a hunting location.
• Participant in a parade.
11-9
• A passenger secured in a seatbelt in a manufacturer-installed seat located outside the
passenger compartment.
A person driving an open vehicle, including pick-up trucks and convertibles, may not transport a
dog in the open portion of that vehicle while on a public way unless the dog is secured in a
manner that prevents the dog from falling, jumping or being thrown from the vehicle. Exceptions
are when a dog is being transported by a farmer or farm employee for the performance of
agricultural activities requiring services of the dog, or a hunting dog at a hunting site or that is
being transported between hunting sites by a licensed hunter.
Section 11 practice questions:
1. When operating your vehicle on ice or snow, it takes ______ to _____ times as
much distance to stop your vehicle as it does on dry pavement.
2. What is "hydroplaning" and how should it be handled?
3. What are the two peak moose collision months in Maine?
4. When stopping on icy or snow-covered roads how should you apply your brakes?
5. How should you approach an uncontrolled intersection?
6. Construction warning signs are what color?
12-1
SECTION 12
Test Your Knowledge
Select (a, b, or c) that best answers the question.
1. Alcohol and other drugs:
a. Reduce your judgment
b. Increase your reaction time
c. Improve your ability to focus
2. A yellow dashed line on your side of the roadway only means:
a. Passing is prohibited on both sides
b. Passing is permitted on both sides
c. Passing is permitted on your side
3. If you arrive at a four-way intersection controlled by stop signs at the same time as another
driver, you should:
a. Continue through the intersection
b. Yield the right-of-way to the driver on your right
c. The driver on your left should go first
4. Which sign warns a divided highway begins?
a. b. c.
5. This road signs means:
a. Right curve
b. Curvy road ahead
c. Sharp curve ahead
6. Regulatory signs are:
a. Green
b. Yellow
c. White
12-2
7. If a pedestrian is crossing in the middle of the street, not at a crosswalk (also known as
jaywalking), even if it is illegal, you:
a. Must stop for them
b. Do not have to stop for them
c. Should honk your horn at them
8. Motorcycle operators have the right to:
a. Use a complete traffic lane
b. Share a traffic lane with a vehicle
c. Use the shoulder of a roadway
9. When approaching or passing a bicyclist you should:
a. Slow down and allow as much space as possible
b. Sound your horn to alert your presence
c. Speed up and quickly pass the bicyclist
10. When driving at night use your high beams when:
a. Fog, rain or snow is present
b. Following another vehicle
c. There is no oncoming traffic approaching
Correct Answers: 1. a; 2. c; 3. b; 4. a; 5. c; 6. c; 7. a; 8. a; 9. a; 10. C
Appendix A
Typical Reasons for Road Test Refusals
The examiner may refuse the road test for:
• Vehicle non-compliance with the Maine Motor Vehicle Inspection criteria (inspection
sticker has expired).
• Front seats not available for examiner or are not properly secured to the floor of the
vehicle.
• Vehicle improperly equipped (for climatic conditions) e.g. snow treads or chains.
• Glove compartment not properly secured.
• Applicant refuses to remove pets from vehicle.
Road Test Information
The duty of the examiner is to render an impartial decision covering all phases of the
road test.
During the road test the examiner will observe and evaluate your ability to operate and control a
motor vehicle with sufficient skill and knowledge to be a safe and competent driver on the
highways of the State of Maine, whether it be driving forward or backward, maintaining your
proper lane position, turning left or right or driving straight ahead. You will also be evaluated on
how well you observe and react to other road users and pedestrians, as well as traffic signs,
signals, and conditions. You will not be asked to do anything that is extraordinary or illegal.
The reason for road test disqualification can vary depending on road conditions, traffic and the
applicant's judgment and ability to cope with situations that arise during a road test, as well as
driving habits.
Residency/Lawful Presence Requirements
A license may not be issued to a person unless acceptable documentary evidence of the person's
residence or domicile in this State is presented. The Secretary of State may exempt from the
requirements someone who has established, to the satisfaction of the Secretary of State, that the
person is on active duty in the United States Armed Forces, the spouse or child of a person on
active duty in the United States Armed Forces or a student enrolled in a university, college or
school within the State.
Acceptable documentary evidence of a person's residence or domicile in this State must include
the Applicant's name and the physical address of the person's residence or domicile in the State.
A post office box or other mail drop address is not sufficient. Acceptable documentary evidence
includes, but is not limited to:
1. A tax return, W-2 form or paycheck stub.
2. A utility bill or a letter from a utility company showing application for service.
3. A contract to which the applicant is a party; or
4. A document issued by a governmental entity.
A person who is unable to provide acceptable documentary evidence as outlined above, may
meet the requirements of the statute by either:
1. Submitting the affidavits of 2 individuals who have a personal or professional
relationship with the person and knowledge of the person and the person's residence or
domicile, which may include a shelter, in this State. A single affidavit signed by a parent
or guardian of a minor making an application is sufficient to meet the residency
requirements. The affidavit is a sworn statement and a false statement by the affiant
constitutes false swearing, which is a violation of Title 17-A Section 452. The Secretary
of State shall provide forms for the completion of affidavits (available at any Bureau of
Motor Vehicles branch office or online at http://www.maine.gov/sos/bmv/forms); or
2. By taking an oath or affirmation before the Secretary of State (or his designee), swearing
to the person's residence or domicile which may include a shelter.
An applicant who supplies false information pursuant to this statute makes a material
misstatement of fact described in MRSA 29-A Section 2103 and is subject to the penalties under
that section.
You cannot obtain or renew a driver's license or non-driver identification card unless you
provide acceptable valid documentary evidence of legal presence in the United States. To
establish evidence of legal presence you must present a legible, unexpired, valid document from
the list as follows:
A. Birth Certificate - must be a certified copy from a State Office of Vital Statistics or equivalent
agency showing the individual was born in:
1. A State of the United States,
2. District of Columbia,
3. Puerto Rico after January 12, 1941,
4. Virgin Islands after January 16, 1917,
5. Guam after April 11, 1899,
6. American Samoa after February 15, 1900,
7. Swains Island after March 3, 1925, or
8. Commonwealth of Northern Mariana Islands after January 8, 1978.
B. Passport or Passport Card from the United States
C. Consular of Report of Birth Abroad, Certificate of Report of Birth or Certification of Report
of Birth
D. Certificate of Naturalization,
E. Certificate of U.S. Citizenship,
F. United States Citizen Identification Card,
G. Identification Card for a Resident Citizen in the U.S.
H. American Indian Card, or
I. Northern Mariana Identification Card.
Acceptable alternative documents for a person born in the United States may include:
1. A certified letter from a jurisdiction listed above stating that no birth record exists. The
letter must include the person's name, date of birth, the years covered by the search for a
birth record, and that there is no birth record on file; and
2. A document issued by the United States or a jurisdiction listed above, showing the name,
date of birth and the birth occurred in a jurisdiction listed above, including military
discharge records, census records, and school records; or
3. At least one of the following:
a. Baptismal certificate, religious record or tribal record showing name, date of birth
and that the birth occurred in a jurisdiction listed above.
b. A hospital birth certificate showing name, date of birth and that the birth occurred
in a jurisdiction listed above.
c. A doctor's record of birth showing name, date of birth and that the birth occurred
in a jurisdiction listed above, or
d. A newspaper or insurance files showing name, date of birth and that the birth
occurred in a jurisdiction listed above.
Persons born outside the United States claiming citizenship through one United States citizen
parent may present:
1. person's foreign birth certificate,
2. proof of citizenship of parent, and
3. evidence of the applicant's legal relationship to parent
Persons born outside the United States claiming citizenship through two United States citizen
parents may present:
1. person's foreign birth certificate,
2. parent's marriage certificate or evidence of the applicant's relationship to the citizen
parents, and
3. proof of parent’s citizenship
Non-Citizens. A person not claiming citizenship may present the following documents to
establish evidence of legal presence in the United States:
A. Permanent Resident Card or Resident Alien Card,
B. Memorandum of Creation of Record of Lawful Permanent Residence,
C. Arrival/Departure Form I-94 or foreign passport with the notation "Processed for I-551"
or I-551 Alien Documentation and Identification System (ADIT) stamp,
Temporary Resident Card,
D. Reentry Permit,
E. Employment Authorization Card,
F. Travel Document or Refugee Travel Document,
G. An Arrival/Departure card, Form I-94 stamped or endorsed.
H. Notice of Action or other official notification showing the period of admission,
I. Student and Exchange Visitor Information System (SEVIS) (Form I-20) or (DS-2019)
properly endorsed or stamped,
J. Letter, order, appellate decision, Arrival/Departure Form I-94 or foreign passport
stamped with Section 207 Refugee, Section 208-Asylee, Section 212(d)(5) Parolee, or
Cuban/Haitian Entrant, Section 243(h), Section 241(b)(3), or Conditional Entrant,
K. Arrival/Departure Form I-94 or Canadian passport coded S13,
L. Letter or tribal document establishing person is an American Indian born in Canada,
M. Letter, order, appellate decision or Arrival/Departure Form I-94 showing a grant of
asylum,
N. An approved or pending application for asylum,
O. An approved or pending application for temporary protected status, or letter or order
granting temporary protected status or deferred enforced departure,
P. Letter, order, appellate decision or Arrival/Departure Form I-94 showing a grant of
withholding of deportation, withholding or removal, suspension of deportation,
cancellation removal, deferral of removal or Convention Against Torture relief,
Q. Pending application for status as a special immigrant juvenile,
R. Letter or notice acknowledging person as victim of crime pursuant to Victims of
Trafficking and Violence Protection Act of 2000, certification letter from United States
Department of Health and Human Services in accordance with the Victims of Trafficking
and Violence Protection Act of 2000, or letter or notice showing person has a prima facie
case as a self-petitioning spouse pursuant to the Violence Against Women Act,
S. Letter, notice, or order of the Board of Immigration Appeals or a federal court granting a
stay of deportation or removal,
T. Letter or notice showing a grant of deferred action or Order of Supervision or similar
status,
U. Any other documents issued by the United States Department of Justice or Homeland
Security, including predecessor or successor federal agencies with responsibility for
implementation of the Immigration and Nationality Act, which indicates legal presence in
the United States.
A driver's license or non-driver identification card issued to a non-citizen may be issued for
a period less than the terms described in statute.
A. A credential will not be issued if the authorized period of admission is less than 120 days.
B. A credential will expire on the date indicated as the expiration date of the authorized
period of admission.
C. If the authorized period of admission is duration of status, the issued credential will
expire four (4) years from date of issuance.
D. If the authorized period of admission is neither, duration of status nor indicated by a
specific date, the issued credential will expire 120 days from the date of issuance.